Plastic Sheet With Adhesive
- Base Film: PET, PE, or PVC
- Adhesive: Acrylic pressure sensitive adhesive
- Liner: Release paper or release film
- Color: Clear, white, black, or tinted
- Format: Roll, sheet, strip, or kiss-cut part
- Use: Mounting, lamination, die-cut assembly
Films Protective Company is a manufacturer of plastic sheet with adhesive for industrial mounting, die-cutting, and pressure lamination. This pressure sensitive plastic film uses a PET, PE, or PVC carrier, a controlled PSA adhesive layer, and release paper or release film to protect the adhesive before application. It is used on stainless steel, aluminum, coated metal, PET, PVC, ABS, and similar production surfaces where bonding pressure, liner stability, peel strength, and clean liner removal matter during assembly.
Product Overview
This adhesive-backed plastic sheet is made for parts that need a clean plastic film surface with a ready-to-bond adhesive layer. It avoids liquid glue, heat bonding, screws, or clips, so assembly is cleaner and easier to repeat. After liner removal, the PSA layer bonds through pressure, surface contact, and dwell time. In sample checks, roller pressure gives more even wet-out than hand pressure on larger laminated areas or long bonding edges.
PET is often used for clean slitting, tight die-cut edges, and stable size after lamination. PE is softer and fits curved plastic housings or slightly uneven surfaces more easily. PVC gives a softer touch and more body for mounting pads, overlay backing, or spacer parts. In in-house checks, PET-based PSA film kept cleaner edges on die-cut pieces below 20 mm width, while PE film made better contact on curved ABS housings after roller pressure. Before bulk cutting, confirm film thickness, adhesive coat weight, liner type, release force, peel strength, and final bonding surface.
Benefits
- Controlled bonding: PSA can be adjusted for removable, medium, or stronger permanent bonding.
- Cleaner converting: A stable liner supports kiss-cut parts and reduces edge lifting during matrix removal.
- Cleaner handling: The liner protects the adhesive from dust, oil, moisture, and handling marks.
- Surface-matched adhesion: Peel strength can be tuned for stainless steel, aluminum, coated metal, PET, PVC, ABS, and powder-coated parts.
- Practical film choice: PET gives stability, PE gives flexibility, and PVC gives a softer mounting feel.
- Assembly-ready format: Rolls, sheets, strips, finger-lift tabs, holes, slots, and linered components can be prepared.
How does the release liner affect die-cutting and installation?
The release liner does more than cover the adhesive. It affects how the PSA plastic film runs through slitting, kiss-cutting, flatbed cutting, rotary cutting, and final placement. A firm paper liner supports small die-cut parts and keeps them flatter during waste removal. A PET film liner peels more smoothly and creates less dust during glove handling. In our sample test, 120 gsm release paper kept small PET parts flatter during matrix removal, while 75 um PET release film was easier to peel during manual assembly. Simple sheets may accept a lower-cost liner, but small kiss-cut parts usually need better liner stability.
TDS
Item | Typical Value |
Base Film Options | PET, PE, PVC |
Adhesive Type | Acrylic PSA, removable to permanent grade |
Total Thickness | 50-250 um, depending on film and adhesive |
Adhesive Thickness | 15-80 um typical |
Release Liner | Glassine paper, PE coated paper, or PET release film |
Liner Release Force | 5-25 g/25 mm typical, in-house sample test |
Peel Adhesion To Stainless Steel | 4.5-12 N/25 mm after 20 min dwell |
Test Condition | Clean panel, 2 kg roller pressure, 20 min initial dwell |
Die-Cutting Method | Sheet cut, kiss-cut, rotary die-cut, flatbed die-cut |
Working Temperature | 10 C to 80 C typical application range |
Production Line
Applications
- Mounting plastic insulation films inside electronic assemblies
- Bonding PET, PE, or PVC films to metal or plastic components
- Die-cut spacer films for display modules and control panels
- Adhesive-backed strips for gasket positioning
- Kiss-cut adhesive film parts for automated placement or hand assembly
What should be checked before bonding PSA plastic film to industrial surfaces?
Before using pressure sensitive plastic film, check the real surface condition, not only the material name on the drawing. Stainless steel, painted aluminum, powder-coated metal, ABS, PVC, and PET can show different peel results with the same adhesive. Oil, mold release agent, dust, moisture, and weak roller pressure can reduce bonding. For a stable comparison, we normally suggest a clean surface, 2 kg roller pressure, 20 minute initial dwell, and 24 hour final dwell check. If repositioning is needed, lower initial tack is safer. For long-term holding, final peel strength and shear holding should be tested before full production.
Loading Details
FAQ
Is this plastic sheet with adhesive suitable for die-cut parts?
Yes. It can be supplied with release paper or release film for kiss-cutting, sheet cutting, strips, holes, tabs, and linered assembly parts.
Which base film should I choose: PET, PE, or PVC?
PET is better for precision and dimensional stability, PE is better for flexible fitting, and PVC is better for a softer or thicker mounting film.
Can the peel strength be adjusted?
Yes. The PSA layer can be made for removable, medium, or stronger bonding according to the surface, dwell time, and installation method.
Does the adhesive need heat or liquid glue?
No. This is a pressure sensitive plastic film. It bonds through pressure, surface contact, and dwell time after liner removal.
