No products were found matching your selection.
Other Related Products
-
- Material: Coated PET polyester film
- Base Color: Transparent / white PET
- Common Thickness: 75um-175um
- Surface: Glossy, matte, or semi-matte
- Ink Use: Dye, pigment, aqueous, selected UV inkjet
- Format: Roll or sheet supply
-
- Material: High-density polyethylene (HDPE)
- Forms: Film rolls, sheet rolls and cut sheets
- Density: Grade-dependent, typically 0.94-0.97 g/cm3
- Colors: Natural, milky white, black or custom color
- Processing: Slitting, sheet cutting and optional perforation
- Uses: Liners, separators and temporary barriers
-
- Material: PE/LDPE temporary surface film
- Adhesive: Removable water-based acrylic adhesive
- Thickness: 40-120um typical
- Width: 100-2000mm, slit to order
- Colors: Transparent, blue, white, black-white
- Surfaces: Ceramic, porcelain, glazed, polished tiles
-
- Material: PE protective film
- Adhesive: removable water-based acrylic adhesive
- Color options: clear, blue, white
- Common thickness: 2.5-5 mil
- Common widths: 24″, 30″, 36″
- Use: temporary marble surface protection
-
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
-
- Backing: PE, PP, PET or woven reinforced film
- Adhesive: high-tack acrylic PSA
- Thickness: 70-250 um by grade
- Color: clear, white, milky white or custom tint
- Roll: slit or wide rolls, 3 inch core
- Use: mirror backside and painted glass backing
-
- Material: LLDPE polyethylene resin
- Thickness: 20-200 um, grade-dependent
- Width: 100-2200 mm, customizable
- Color: Clear, translucent or customized
- Structure: Mono-layer or co-extruded film
- Supply format: Roll stock, tubing or lay-flat sheeting
-
Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.
-
- Material: Biaxially oriented PET polyester film
- Color: Milky white, hazy white, or natural clear by grade
- Thickness: 50 um – 350 um
- Width: Slit roll or master roll, custom width available
- Surface: Untreated, corona treated, or chemically treated
- Main use: Motors, transformers, FPC, FFC, and electrical gaskets
