No products were found matching your selection.
Other Related Products
-
- Material: LDPE/PE with flame-retardant additive system
- Thickness: 50-250 um / 4-10 mil typical range
- Width: 1 m-4 m rolls, slit width available
- Colors: orange, white, natural translucent, opaque
- Roll length: 25 m, 50 m, 100 ft, or specified length
- Options: warning print, anti-static, UV grade after test confirmation
-
- Material: PE / polyethylene film with removable pressure-sensitive adhesive
- Thickness: commonly 30-120 um, depending on grade
- Adhesion: low tack, medium tack, and high tack options
- Colors: clear, blue, white, black-white, or printed film
- Roll format: custom slit width, roll length, core size, and winding direction
- Use: temporary surface protection during stamping, bending, shearing, handling, and transport
-
- Materials: PET, PE, PP, PVC, PC.
- Formats: roll stock, sheet, slit roll, cut-to-size.
- Thickness: 0.05 mm-2.00 mm typical range.
- Slit width: 200 mm-1200 mm typical range.
- Roll core: 3 inch or 6 inch.
- Surfaces: gloss, matte, frosted, textured, treated.
-
- Material: hard-coated transparent PET film
- Thickness: 50-188 um, selected by coating grade
- Surface: clear gloss, low-haze hardcoat
- Hardcoat side: first visible surface
- Options: printable reverse, liner, adhesive-backed format
- Supply: slit rolls, sheets, die-cut overlay blanks
-
- Material: heat-stabilized PET polyester film
- Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
- Surface: corona treated, primer coated, or chemically treated
- Color: clear, slightly hazy, or white
- Ink fit: silver ink, carbon ink, dielectric ink
- Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
-
- Material: PE film
- Adhesive: acrylic pressure-sensitive adhesive
- Common colors: clear, blue, milky white
- Common thickness: 30–100 micron
- Roll format: slit rolls, log rolls, jumbo rolls
- Suitable surfaces: coated metal, stainless-look, plastic panels
-
- Material: Biaxially oriented polyethylene
- Appearance: Clear or high-gloss
- Typical thickness: 18-40 um, grade dependent
- Width: Master rolls and custom slit rolls
- Surface treatment: One-side or two-side corona treatment
- Grade options: Printing, laminating, sealable or non-sealable
-
This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.
-
Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.
