No products were found matching your selection.

Other Related Products

  • a Pet Film For Thermoforming

    • Material: APET / thermoforming PET
    • Supply form: roll or sheet
    • Common thickness: 150–1200 μm
    • Color: clear, transparent, or custom tint
    • Surface: smooth, glossy forming surface
    • Main use: trays, blisters, clamshells, lids, inserts
    Read moreDone

  • PE Thermoplastic Adhesive Film for Heat Lamination and Bonding

    • Material: PE / modified polyolefin hot melt adhesive film
    • Color: Milky white, translucent, or natural by grade
    • Thickness: Commonly 20 um-200 um, adjustable by structure
    • Supply: Full roll, slit roll, sheet, or die-cut piece
    • Liner: Release paper, release film, or liner-free option
    • Use: Heat lamination, hot pressing, and industrial assembly
    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Clear Protective Film Solutions for Printed Graphics and Display Surfaces

    A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.

    Read moreDone
  • Placeholder

    Linear Low Density Polyethylene Film

    • Material: LLDPE polyethylene resin
    • Thickness: 20-200 um, grade-dependent
    • Width: 100-2200 mm, customizable
    • Color: Clear, translucent or customized
    • Structure: Mono-layer or co-extruded film
    • Supply format: Roll stock, tubing or lay-flat sheeting
    Read moreDone
  • Placeholder

    High Density Polyethylene Film

    • Material: High-density polyethylene (HDPE)
    • Forms: Film rolls, sheet rolls and cut sheets
    • Density: Grade-dependent, typically 0.94-0.97 g/cm3
    • Colors: Natural, milky white, black or custom color
    • Processing: Slitting, sheet cutting and optional perforation
    • Uses: Liners, separators and temporary barriers
    Read moreDone
  • Placeholder

    Silicone Coated Polyethylene Films

    • Base film: flexible LDPE or application-specific HDPE
    • Coating: single-side, double-side, or differential release
    • Release level: easy, medium, or tight grade
    • Supply format: master rolls or custom slit rolls
    • Roll setup: core size and silicone side in or out confirmed
    • Uses: tape, label, foam adhesive, and hygiene-material converting
    Read moreDone

  • Scratch Resistant Clear PET Film

    • Material: hard-coated transparent PET film
    • Thickness: 50-188 um, selected by coating grade
    • Surface: clear gloss, low-haze hardcoat
    • Hardcoat side: first visible surface
    • Options: printable reverse, liner, adhesive-backed format
    • Supply: slit rolls, sheets, die-cut overlay blanks
    Read moreDone

  • Self Adhesive Protective Film for Control Panels

    • Material: PETor PE
    • Color: Clear or matte
    • Adhesive: Acrylic
    • Tack Level: Low to medium
    • Thickness: 50-100 microns
    • Supply Form: Rolls, sheets, die-cut pieces
    Read moreDone