No products were found matching your selection.
Other Related Products
-
- Materials: PET, PE, PP, PVC, PC.
- Formats: roll stock, sheet, slit roll, cut-to-size.
- Thickness: 0.05 mm-2.00 mm typical range.
- Slit width: 200 mm-1200 mm typical range.
- Roll core: 3 inch or 6 inch.
- Surfaces: gloss, matte, frosted, textured, treated.
-
- Materials: PET, PE, PVC sheet
- Adhesive: acrylic PSA
- Color: clear, white, black, custom
- Form: sheets, cut pieces, die-cut parts
- Liner: paper or PET release liner
- Use: mounting, lamination, assembly
-
- Material: Biaxially oriented PET polyester film
- Color: Milky white, hazy white, or natural clear by grade
- Thickness: 50 um – 350 um
- Width: Slit roll or master roll, custom width available
- Surface: Untreated, corona treated, or chemically treated
- Main use: Motors, transformers, FPC, FFC, and electrical gaskets
-
- Material: hard-coated transparent PET film
- Thickness: 50-188 um, selected by coating grade
- Surface: clear gloss, low-haze hardcoat
- Hardcoat side: first visible surface
- Options: printable reverse, liner, adhesive-backed format
- Supply: slit rolls, sheets, die-cut overlay blanks
-
This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.
-
- Material: PET / BOPET polyester film
- Color: Deep matte black
- Typical Thickness: 25 um to 188 um
- Surface: One-side matte or two-side matte
- Main Functions: Light blocking, insulation, die cutting
- Typical Uses: Labels, gaskets, spacers, shielding parts
-
- Material: APET / thermoforming PET
- Supply form: roll or sheet
- Common thickness: 150–1200 μm
- Color: clear, transparent, or custom tint
- Surface: smooth, glossy forming surface
- Main use: trays, blisters, clamshells, lids, inserts
-
- Material: PET or PE film
- Adhesive: Acrylic or silicone PSA
- Color: Clear, light blue, or custom
- Thickness: 50um, 75um, 100um, or custom
- Surface Resistance: 10^5-10^11 ohms by grade
- Use: PCB, FPC, panel, IC carrier, electronics turnover
-
- Materials: PE, PVC, PET and PETG
- Thickness: 30 um-600 um by grade
- Finishes: clear, matte, high gloss, wood grain, skin-feel
- Format: slit rolls, jumbo rolls or custom rolls
- Uses: MDF, cabinet, wardrobe and tabletop panels
- Checks: peel force, residue, edge lifting, color consistency
