No products were found matching your selection.
Other Related Products
-
This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.
-
- Material: Clear BOPET / polyester
- Surface: Glossy clear side
- Thickness: 12-100 um
- Common grades: 23 um, 36 um, 50 um
- Format: Jumbo or slit rolls
- Treatment: Corona or top-coated option
-
Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.
-
- Material: PE/LDPE temporary surface film
- Adhesive: Removable water-based acrylic adhesive
- Thickness: 40-120um typical
- Width: 100-2000mm, slit to order
- Colors: Transparent, blue, white, black-white
- Surfaces: Ceramic, porcelain, glazed, polished tiles
-
- Material: Biaxially oriented polyethylene
- Appearance: Clear or high-gloss
- Typical thickness: 18-40 um, grade dependent
- Width: Master rolls and custom slit rolls
- Surface treatment: One-side or two-side corona treatment
- Grade options: Printing, laminating, sealable or non-sealable
-
- Material: High-density polyethylene (HDPE)
- Forms: Film rolls, sheet rolls and cut sheets
- Density: Grade-dependent, typically 0.94-0.97 g/cm3
- Colors: Natural, milky white, black or custom color
- Processing: Slitting, sheet cutting and optional perforation
- Uses: Liners, separators and temporary barriers
-
- Material: PE film with removable pressure-sensitive adhesive
- Color: clear, light blue, milky white, or custom tint
- Thickness: typical 30-100 um, grade-dependent
- Format: rolls, sheets, slit rolls, or die-cut pieces
- Adhesion: low to low-medium tack for clean peeling
- Use: appliance glass, display windows, glossy fascia, coated panels
-
- Common thickness: 0.05-0.50 mm
- Cut style: kiss-cut or through-cut
- Shapes: tabs, strips, frames, windows, discs
- Color: clear, white, black, amber, custom
- Liner: PET liner, paper liner, split liner
- Format: roll, sheet, or single piece
-
- Material: heat-stabilized PET polyester film
- Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
- Surface: corona treated, primer coated, or chemically treated
- Color: clear, slightly hazy, or white
- Ink fit: silver ink, carbon ink, dielectric ink
- Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
