No products were found matching your selection.

Other Related Products

  • Wafer Dicing Protective Film

    • Standard wafer sizes:4 inch, 6 inch, 8 inch, 12 inch
    • Film color:Blue transparent or clear
    • Backing material:PO, PVC, or PET-based film
    • Adhesive type:UV-sensitive acrylic adhesive
    • Process use:Wafer mounting, blade dicing, irradiation, die pick-up
    • Clean packaging:Individual roll pack, double anti-static PE bag, lot traceable
    Read moreDone

  • Silicone Coated Polyester Release Film

    • Material: Polyester film with silicone coating
    • Coating: Single-side, double-side, differential release
    • Color: Clear standard, tinted optional
    • Roll format: Jumbo, slit, rewound roll
    • Use: Adhesive converting, die cutting, laminating
    • Applications: Tapes, labels, transfer adhesives
    Read moreDone
  • Placeholder

    Low Density Polyethylene Film

    • Material: Soft LDPE roll film
    • Appearance: Clear or natural translucent
    • Thickness: 20-200 um typical range
    • Width: 300-3000 mm typical range
    • Formats: Single wound, double wound, centerfold, tubing
    • Uses: Liners, wrapping, covers, heat-sealed converting
    Read moreDone

  • Self Adhesive Protective Film for Control Panels

    • Material: PETor PE
    • Color: Clear or matte
    • Adhesive: Acrylic
    • Tack Level: Low to medium
    • Thickness: 50-100 microns
    • Supply Form: Rolls, sheets, die-cut pieces
    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Polyester Film For Lamination

    • Material: PET base film with EVA adhesive layer
    • Finish: Clear gloss or clear matte
    • Thickness: 25um-250um roll thickness
    • Temperature: 90C-120C typical range
    • Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
    • Use: Thermal print lamination and printed material protection
    Read moreDone

  • Die Cut Plastic Film Parts

    • Common thickness: 0.05-0.50 mm
    • Cut style: kiss-cut or through-cut
    • Shapes: tabs, strips, frames, windows, discs
    • Color: clear, white, black, amber, custom
    • Liner: PET liner, paper liner, split liner
    • Format: roll, sheet, or single piece
    Read moreDone

  • PET Film Puncture Resistance Technical Data

    PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.

    Read moreDone

  • Marble Countertop Protection Film

    • Material: PE protective film
    • Adhesive: removable water-based acrylic adhesive
    • Color options: clear, blue, white
    • Common thickness: 2.5-5 mil
    • Common widths: 24″, 30″, 36″
    • Use: temporary marble surface protection
    Read moreDone