No products were found matching your selection.
Other Related Products
-
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
-
- Structure: PET carrier / acrylic PSA / release liner
- PET carrier: 25-125 um common range
- Color: clear, white, matte, or application-matched finish
- Adhesive: permanent or removable acrylic PSA
- Liner: PET, glassine, kraft, or silicone-coated liner
- Supply: jumbo roll, slit roll, narrow roll, or sheet-converted stock
-
- Material: PET base film with EVA adhesive layer
- Finish: Clear gloss or clear matte
- Thickness: 25um-250um roll thickness
- Temperature: 90C-120C typical range
- Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
- Use: Thermal print lamination and printed material protection
-
- Material: PE / polyethylene film with removable pressure-sensitive adhesive
- Thickness: commonly 30-120 um, depending on grade
- Adhesion: low tack, medium tack, and high tack options
- Colors: clear, blue, white, black-white, or printed film
- Roll format: custom slit width, roll length, core size, and winding direction
- Use: temporary surface protection during stamping, bending, shearing, handling, and transport
-
- Material: PE protective film
- Adhesive: low tack acrylic pressure-sensitive adhesive
- Common Colors: blue, clear, translucent
- Common Thickness: 40–80 microns
- Common Roll Width: 24 mm to 1240 mm
- Typical Use: temporary protection for window glass and smooth frames
-
- Materials: PET, PE, PP, PVC, PC.
- Formats: roll stock, sheet, slit roll, cut-to-size.
- Thickness: 0.05 mm-2.00 mm typical range.
- Slit width: 200 mm-1200 mm typical range.
- Roll core: 3 inch or 6 inch.
- Surfaces: gloss, matte, frosted, textured, treated.
-
- Material: Heat stabilized PET polyester film
- Appearance: Clear or milky white available
- Thickness Range: 50um-350um typical
- Roll Format: Custom slit roll width
- Surface: Untreated, one-side treated, or two-side treated
- Main Use: FPC, printed electronics, insulation, coating, baking, lamination
-
This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.
-
- Material: optical PET with AF oleophobic surface
- Surface options: clear, matte, anti-glare
- Common thickness: 75 um, 100 um, 125 um
- Color: transparent or light matte
- Format: sheet or custom die-cut size
- Application: phone, tablet, POS and terminal screens
