No products were found matching your selection.
Other Related Products
-
- Material: PE-based monoaxially oriented film
- Appearance: Transparent, gloss, matte or application-specific finish
- Thickness: Grade-dependent; downgauged options by trial approval
- Width: Custom slit width for converting lines
- Treatment: Single-side or double-side corona treatment
- Supply Form: Finished rolls with confirmed winding direction
-
- Material: Clear BOPET / polyester
- Surface: Glossy clear side
- Thickness: 12-100 um
- Common grades: 23 um, 36 um, 50 um
- Format: Jumbo or slit rolls
- Treatment: Corona or top-coated option
-
PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.
-
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Color: clear / transparent
- Thickness: 80–110 micron
- Roll Size: 600–1200 mm width, 50–500 m length
- Use: temporary protection for dry synthetic carpet
-
Protective film for medical carpets is useful when controlled passages stay operational during personnel movement, trolley traffic, maintenance, or temporary installation work. The key is not maximum adhesion: film must remain stable at doors, turns, overlaps, and traffic hotspots while staying compatible with planned removal. Selection should balance carpet construction, surface treatment, traffic pattern, dwell time, environment, and operator method. In cleanroom or controlled areas, approve the system on the actual carpet before full-area application and retest when surface, traffic, or protection time changes.
-
- Material: PE film
- Adhesive: Acrylic-based adhesive
- Thickness: 30–100 microns
- Width: 100–1600 mm
- Color: Transparent, blue, black & white, custom print
- Use: Composite panel processing and temporary surface protection
-
- Standard wafer sizes:4 inch, 6 inch, 8 inch, 12 inch
- Film color:Blue transparent or clear
- Backing material:PO, PVC, or PET-based film
- Adhesive type:UV-sensitive acrylic adhesive
- Process use:Wafer mounting, blade dicing, irradiation, die pick-up
- Clean packaging:Individual roll pack, double anti-static PE bag, lot traceable
-
- Common thickness:20-300 um, ACP grades often 20-150 um
- Available width:300-3000 mm, slit rolls for panel lamination lines
- Resin options:EAA, EVA, PES, PO, and modified polyolefin
- Color:Transparent, translucent, milky white, or resin-dependent
- Structure:Glassine release paper or linerless roll format
- Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
-
- Material: Coated PET polyester film
- Base Color: Transparent / white PET
- Common Thickness: 75um-175um
- Surface: Glossy, matte, or semi-matte
- Ink Use: Dye, pigment, aqueous, selected UV inkjet
- Format: Roll or sheet supply
