No products were found matching your selection.

Other Related Products

  • Matte Black Polyester Film

    • Material: PET / BOPET polyester film
    • Color: Deep matte black
    • Typical Thickness: 25 um to 188 um
    • Surface: One-side matte or two-side matte
    • Main Functions: Light blocking, insulation, die cutting
    • Typical Uses: Labels, gaskets, spacers, shielding parts
    Read moreDone
  • Placeholder

    Silicone Coated Polyethylene Films

    • Base film: flexible LDPE or application-specific HDPE
    • Coating: single-side, double-side, or differential release
    • Release level: easy, medium, or tight grade
    • Supply format: master rolls or custom slit rolls
    • Roll setup: core size and silicone side in or out confirmed
    • Uses: tape, label, foam adhesive, and hygiene-material converting
    Read moreDone

  • Wafer Dicing Protective Film

    • Standard wafer sizes:4 inch, 6 inch, 8 inch, 12 inch
    • Film color:Blue transparent or clear
    • Backing material:PO, PVC, or PET-based film
    • Adhesive type:UV-sensitive acrylic adhesive
    • Process use:Wafer mounting, blade dicing, irradiation, die pick-up
    • Clean packaging:Individual roll pack, double anti-static PE bag, lot traceable
    Read moreDone

  • Pressure Sensitive Polyester Film for Die-Cut Labels and Overlays

    • Structure: PET carrier / acrylic PSA / release liner
    • PET carrier: 25-125 um common range
    • Color: clear, white, matte, or application-matched finish
    • Adhesive: permanent or removable acrylic PSA
    • Liner: PET, glassine, kraft, or silicone-coated liner
    • Supply: jumbo roll, slit roll, narrow roll, or sheet-converted stock
    Read moreDone

  • Protective Film for Laser Engraving: Surface Compatibility and Clean-Removal Validation

    Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.

    Read moreDone

  • Double Sided OCA Film for Display Bonding

    • Material: optically clear acrylic OCA adhesive
    • Structure: no-substrate adhesive with PET release liners
    • Thickness: 25um-250um, grade-dependent
    • Appearance: transparent, low haze, clean surface
    • Format: roll, sheet, kiss-cut or die-cut part
    • Use: glass, touch layer, and display module bonding
    Read moreDone

  • Polyester Film Heat Stabilized

    • Material: Heat stabilized PET polyester film
    • Appearance: Clear or milky white available
    • Thickness Range: 50um-350um typical
    • Roll Format: Custom slit roll width
    • Surface: Untreated, one-side treated, or two-side treated
    • Main Use: FPC, printed electronics, insulation, coating, baking, lamination
    Read moreDone

  • UV Stabilized Polyethylene Film for Outdoor Covering and Packaging

    • Material: LDPE, LLDPE, or PE blend
    • Thickness: 40 um-250 um
    • Width: slit rolls or wide sheeting
    • Color: clear, white, black, blue, or tinted
    • Format: single wound, center-folded, or sheets
    • Use: greenhouse, outdoor cover, packaging
    Read moreDone

  • Refrigerator Adhesive Film

    • Material: PE film
    • Adhesive: acrylic pressure-sensitive adhesive
    • Common colors: clear, blue, milky white
    • Common thickness: 30–100 micron
    • Roll format: slit rolls, log rolls, jumbo rolls
    • Suitable surfaces: coated metal, stainless-look, plastic panels
    Read moreDone