No products were found matching your selection.

Other Related Products

  • Protective Film for Laser Engraving: Surface Compatibility and Clean-Removal Validation

    Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.

    Read moreDone

  • Glossy Clear PET Film for Labels, Overlays and Lamination

    • Material: Clear BOPET / polyester
    • Surface: Glossy clear side
    • Thickness: 12-100 um
    • Common grades: 23 um, 36 um, 50 um
    • Format: Jumbo or slit rolls
    • Treatment: Corona or top-coated option
    Read moreDone

  • Double Sided OCA Film for Display Bonding

    • Material: optically clear acrylic OCA adhesive
    • Structure: no-substrate adhesive with PET release liners
    • Thickness: 25um-250um, grade-dependent
    • Appearance: transparent, low haze, clean surface
    • Format: roll, sheet, kiss-cut or die-cut part
    • Use: glass, touch layer, and display module bonding
    Read moreDone

  • Inkjet Printable Polyester Film

    • Material: Coated PET polyester film
    • Base Color: Transparent / white PET
    • Common Thickness: 75um-175um
    • Surface: Glossy, matte, or semi-matte
    • Ink Use: Dye, pigment, aqueous, selected UV inkjet
    • Format: Roll or sheet supply
    Read moreDone

  • Marble Countertop Protection Film

    • Material: PE protective film
    • Adhesive: removable water-based acrylic adhesive
    • Color options: clear, blue, white
    • Common thickness: 2.5-5 mil
    • Common widths: 24″, 30″, 36″
    • Use: temporary marble surface protection
    Read moreDone

  • UV Stabilized Polyethylene Film for Outdoor Covering and Packaging

    • Material: LDPE, LLDPE, or PE blend
    • Thickness: 40 um-250 um
    • Width: slit rolls or wide sheeting
    • Color: clear, white, black, blue, or tinted
    • Format: single wound, center-folded, or sheets
    • Use: greenhouse, outdoor cover, packaging
    Read moreDone

  • Polyester Film For Lamination

    • Material: PET base film with EVA adhesive layer
    • Finish: Clear gloss or clear matte
    • Thickness: 25um-250um roll thickness
    • Temperature: 90C-120C typical range
    • Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
    • Use: Thermal print lamination and printed material protection
    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Self Adhesive Window Protection Film

    • Material: PE protective film
    • Adhesive: low tack acrylic pressure-sensitive adhesive
    • Common Colors: blue, clear, translucent
    • Common Thickness: 40–80 microns
    • Common Roll Width: 24 mm to 1240 mm
    • Typical Use: temporary protection for window glass and smooth frames
    Read moreDone