No products were found matching your selection.
Other Related Products
-
- Material: Soft LDPE roll film
- Appearance: Clear or natural translucent
- Thickness: 20-200 um typical range
- Width: 300-3000 mm typical range
- Formats: Single wound, double wound, centerfold, tubing
- Uses: Liners, wrapping, covers, heat-sealed converting
-
- Material: Clear PET backing with silicone adhesive
- Color: Transparent clear
- Heat Reference: Around 150 C short-term exposure
- Test Option: 150 C / 30 min oven exposure
- Adhesion: Low to medium tack
- Format: Roll film with optional PET liner
-
This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.
-
- Product Type: Clear adhesive film for graphic and photo mounting
- Manufacturer: Films Protective Company
- Appearance: Transparent adhesive layer with clear release liner
- Common Widths: 635 mm, 1040 mm, 1300 mm, 1520 mm, custom width available
- Application Method: Cold lamination, roller pressure, face mounting
- Main Uses: Acrylic photo panels, display boards, printed graphics, rigid presentation panels
-
- Material: Coated PET polyester film
- Base Color: Transparent / white PET
- Common Thickness: 75um-175um
- Surface: Glossy, matte, or semi-matte
- Ink Use: Dye, pigment, aqueous, selected UV inkjet
- Format: Roll or sheet supply
-
- Standard wafer sizes:4 inch, 6 inch, 8 inch, 12 inch
- Film color:Blue transparent or clear
- Backing material:PO, PVC, or PET-based film
- Adhesive type:UV-sensitive acrylic adhesive
- Process use:Wafer mounting, blade dicing, irradiation, die pick-up
- Clean packaging:Individual roll pack, double anti-static PE bag, lot traceable
-
- Material: LDPE/PE with flame-retardant additive system
- Thickness: 50-250 um / 4-10 mil typical range
- Width: 1 m-4 m rolls, slit width available
- Colors: orange, white, natural translucent, opaque
- Roll length: 25 m, 50 m, 100 ft, or specified length
- Options: warning print, anti-static, UV grade after test confirmation
-
- Material: LLDPE polyethylene resin
- Thickness: 20-200 um, grade-dependent
- Width: 100-2200 mm, customizable
- Color: Clear, translucent or customized
- Structure: Mono-layer or co-extruded film
- Supply format: Roll stock, tubing or lay-flat sheeting
-
Protective film for medical carpets is useful when controlled passages stay operational during personnel movement, trolley traffic, maintenance, or temporary installation work. The key is not maximum adhesion: film must remain stable at doors, turns, overlaps, and traffic hotspots while staying compatible with planned removal. Selection should balance carpet construction, surface treatment, traffic pattern, dwell time, environment, and operator method. In cleanroom or controlled areas, approve the system on the actual carpet before full-area application and retest when surface, traffic, or protection time changes.
