No products were found matching your selection.
Other Related Products
-
- Structure: PET carrier / acrylic PSA / release liner
- PET carrier: 25-125 um common range
- Color: clear, white, matte, or application-matched finish
- Adhesive: permanent or removable acrylic PSA
- Liner: PET, glassine, kraft, or silicone-coated liner
- Supply: jumbo roll, slit roll, narrow roll, or sheet-converted stock
-
- Material: Polyester film with silicone coating
- Coating: Single-side, double-side, differential release
- Color: Clear standard, tinted optional
- Roll format: Jumbo, slit, rewound roll
- Use: Adhesive converting, die cutting, laminating
- Applications: Tapes, labels, transfer adhesives
-
- Material: PE film with embedded string or scrim reinforcement
- Structure: square, diamond or diagonal grid options
- Thickness: grade-dependent industrial range
- Colors: clear, white and blue options
- Supply: roll-wound or accordion-folded wide rolls
- Options: UV-stabilized, FR / NFR and reinforced-edge grades
-
- Material: PE-based monoaxially oriented film
- Appearance: Transparent, gloss, matte or application-specific finish
- Thickness: Grade-dependent; downgauged options by trial approval
- Width: Custom slit width for converting lines
- Treatment: Single-side or double-side corona treatment
- Supply Form: Finished rolls with confirmed winding direction
-
- Material: removable PE protective film
- Surfaces: acrylic sheet, PMMA, plexiglass, smooth plastic sheet
- Colors: clear, blue, white, black-white, printed
- Thickness: 30-100 um by grade
- Adhesion: low, medium or adjusted tack
- Format: slit rolls with confirmed core and winding direction
-
- Material: PETor PE
- Color: Clear or matte
- Adhesive: Acrylic
- Tack Level: Low to medium
- Thickness: 50-100 microns
- Supply Form: Rolls, sheets, die-cut pieces
-
A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.
-
- Material: Biaxially oriented polyethylene
- Appearance: Clear or high-gloss
- Typical thickness: 18-40 um, grade dependent
- Width: Master rolls and custom slit rolls
- Surface treatment: One-side or two-side corona treatment
- Grade options: Printing, laminating, sealable or non-sealable
-
- Material: Soft LDPE roll film
- Appearance: Clear or natural translucent
- Thickness: 20-200 um typical range
- Width: 300-3000 mm typical range
- Formats: Single wound, double wound, centerfold, tubing
- Uses: Liners, wrapping, covers, heat-sealed converting
