No products were found matching your selection.
Other Related Products
-
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
-
Chemical resistance PET film data is meaningful only when construction, reagent, concentration, contact method, temperature, and exposure time are defined. It applies to PET/BOPET base film, coated PET, and adhesive-backed protective film. Compare appearance, haze, mechanical retention, coating integrity, and peel behavior after exposure. Actual-substrate testing should confirm sensitive coatings, repeated cleaning, or delayed removal.
-
- Material: optically clear acrylic OCA adhesive
- Structure: no-substrate adhesive with PET release liners
- Thickness: 25um-250um, grade-dependent
- Appearance: transparent, low haze, clean surface
- Format: roll, sheet, kiss-cut or die-cut part
- Use: glass, touch layer, and display module bonding
-
Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.
-
- Common supply form: jumbo roll, slit roll, sheet, or die-cut parts
- Appearance: clear transparent film for visible bonding areas
- Typical film base: PET clear film or heat-resistant specialty film construction
- Adhesive direction: clear acrylic bonding grade or process-matched adhesive system
- Typical use: transparent bonding, lamination, masking, and insulation
- Order style: factory production for industrial converting projects
-
- Material: Polyester film with silicone coating
- Coating: Single-side, double-side, differential release
- Color: Clear standard, tinted optional
- Roll format: Jumbo, slit, rewound roll
- Use: Adhesive converting, die cutting, laminating
- Applications: Tapes, labels, transfer adhesives
-
- Material: APET / thermoforming PET
- Supply form: roll or sheet
- Common thickness: 150–1200 μm
- Color: clear, transparent, or custom tint
- Surface: smooth, glossy forming surface
- Main use: trays, blisters, clamshells, lids, inserts
-
- Material: PE protective film
- Adhesive: removable water-based acrylic adhesive
- Color options: clear, blue, white
- Common thickness: 2.5-5 mil
- Common widths: 24″, 30″, 36″
- Use: temporary marble surface protection
-
- Material: Soft LDPE roll film
- Appearance: Clear or natural translucent
- Thickness: 20-200 um typical range
- Width: 300-3000 mm typical range
- Formats: Single wound, double wound, centerfold, tubing
- Uses: Liners, wrapping, covers, heat-sealed converting
