No products were found matching your selection.

Other Related Products

  • Placeholder

    Static Dissipative Polyethylene Film

    • Material: Non-adhesive LDPE, LLDPE, or PE blend
    • Appearance: Transparent, semi-transparent, or customized color
    • Formats: Flat film, tubing, sheeting, bags, and liner bags
    • ESD control: Grade-dependent dissipative performance
    • Processing: Slitting, heat sealing, bag making, and printing
    • Applications: IC, PCB, FPC, and electronic-component packaging
    Read moreDone

  • Matte Black Polyester Film

    • Material: PET / BOPET polyester film
    • Color: Deep matte black
    • Typical Thickness: 25 um to 188 um
    • Surface: One-side matte or two-side matte
    • Main Functions: Light blocking, insulation, die cutting
    • Typical Uses: Labels, gaskets, spacers, shielding parts
    Read moreDone

  • Polyethylene Film Vapor Retarder: ASTM E1745 Technical Data

    This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.

    Read moreDone

  • Double Sided OCA Film for Display Bonding

    • Material: optically clear acrylic OCA adhesive
    • Structure: no-substrate adhesive with PET release liners
    • Thickness: 25um-250um, grade-dependent
    • Appearance: transparent, low haze, clean surface
    • Format: roll, sheet, kiss-cut or die-cut part
    • Use: glass, touch layer, and display module bonding
    Read moreDone

  • Clear Protective Film Solutions for Printed Graphics and Display Surfaces

    A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.

    Read moreDone

  • Anti Static Adhesive Film

    • Material: PET or PE film
    • Adhesive: Acrylic or silicone PSA
    • Color: Clear, light blue, or custom
    • Thickness: 50um, 75um, 100um, or custom
    • Surface Resistance: 10^5-10^11 ohms by grade
    • Use: PCB, FPC, panel, IC carrier, electronics turnover
    Read moreDone

  • Self Adhesive Protective Film for Control Panels

    • Material: PETor PE
    • Color: Clear or matte
    • Adhesive: Acrylic
    • Tack Level: Low to medium
    • Thickness: 50-100 microns
    • Supply Form: Rolls, sheets, die-cut pieces
    Read moreDone

  • Marble Countertop Protection Film

    • Material: PE protective film
    • Adhesive: removable water-based acrylic adhesive
    • Color options: clear, blue, white
    • Common thickness: 2.5-5 mil
    • Common widths: 24″, 30″, 36″
    • Use: temporary marble surface protection
    Read moreDone

  • Glossy Clear PET Film for Labels, Overlays and Lamination

    • Material: Clear BOPET / polyester
    • Surface: Glossy clear side
    • Thickness: 12-100 um
    • Common grades: 23 um, 36 um, 50 um
    • Format: Jumbo or slit rolls
    • Treatment: Corona or top-coated option
    Read moreDone