Adhesive Film For Composite Panel
- Material: PE film
- Adhesive: Acrylic-based adhesive
- Thickness: 30–100 microns
- Width: 100–1600 mm
- Color: Transparent, blue, black & white, custom print
- Use: Composite panel processing and temporary surface protection
No products were found matching your selection.
Other Related Products
-
-
Glossy Clear PET Film for Labels, Overlays and Lamination
- Material: Clear BOPET / polyester
- Surface: Glossy clear side
- Thickness: 12-100 um
- Common grades: 23 um, 36 um, 50 um
- Format: Jumbo or slit rolls
- Treatment: Corona or top-coated option
-
Polyester Film For Lamination
- Material: PET base film with EVA adhesive layer
- Finish: Clear gloss or clear matte
- Thickness: 25um-250um roll thickness
- Temperature: 90C-120C typical range
- Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
- Use: Thermal print lamination and printed material protection
-
Pressure Sensitive Polyester Film for Die-Cut Labels and Overlays
- Structure: PET carrier / acrylic PSA / release liner
- PET carrier: 25-125 um common range
- Color: clear, white, matte, or application-matched finish
- Adhesive: permanent or removable acrylic PSA
- Liner: PET, glassine, kraft, or silicone-coated liner
- Supply: jumbo roll, slit roll, narrow roll, or sheet-converted stock
-
Silicone Coated Polyethylene Films
- Base film: flexible LDPE or application-specific HDPE
- Coating: single-side, double-side, or differential release
- Release level: easy, medium, or tight grade
- Supply format: master rolls or custom slit rolls
- Roll setup: core size and silicone side in or out confirmed
- Uses: tape, label, foam adhesive, and hygiene-material converting
-
Low Density Polyethylene Film
- Material: Soft LDPE roll film
- Appearance: Clear or natural translucent
- Thickness: 20-200 um typical range
- Width: 300-3000 mm typical range
- Formats: Single wound, double wound, centerfold, tubing
- Uses: Liners, wrapping, covers, heat-sealed converting
-
PET Films For Printed Electronics
- Material: heat-stabilized PET polyester film
- Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
- Surface: corona treated, primer coated, or chemically treated
- Color: clear, slightly hazy, or white
- Ink fit: silver ink, carbon ink, dielectric ink
- Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
-
Transparent Conductive Ito PET Film
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
-
Carpet Floor Protection Film
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Color: clear / transparent
- Thickness: 80–110 micron
- Roll Size: 600–1200 mm width, 50–500 m length
- Use: temporary protection for dry synthetic carpet