No products were found matching your selection.
Other Related Products
-
- Material: hard-coated transparent PET film
- Thickness: 50-188 um, selected by coating grade
- Surface: clear gloss, low-haze hardcoat
- Hardcoat side: first visible surface
- Options: printable reverse, liner, adhesive-backed format
- Supply: slit rolls, sheets, die-cut overlay blanks
-
- Material: LDPE, LLDPE, or PE blend
- Thickness: 40 um-250 um
- Width: slit rolls or wide sheeting
- Color: clear, white, black, blue, or tinted
- Format: single wound, center-folded, or sheets
- Use: greenhouse, outdoor cover, packaging
-
- Material: APET / thermoforming PET
- Supply form: roll or sheet
- Common thickness: 150–1200 μm
- Color: clear, transparent, or custom tint
- Surface: smooth, glossy forming surface
- Main use: trays, blisters, clamshells, lids, inserts
-
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
-
- Material: PE-based monoaxially oriented film
- Appearance: Transparent, gloss, matte or application-specific finish
- Thickness: Grade-dependent; downgauged options by trial approval
- Width: Custom slit width for converting lines
- Treatment: Single-side or double-side corona treatment
- Supply Form: Finished rolls with confirmed winding direction
-
- Common supply form: jumbo roll, slit roll, sheet, or die-cut parts
- Appearance: clear transparent film for visible bonding areas
- Typical film base: PET clear film or heat-resistant specialty film construction
- Adhesive direction: clear acrylic bonding grade or process-matched adhesive system
- Typical use: transparent bonding, lamination, masking, and insulation
- Order style: factory production for industrial converting projects
-
- Material: LLDPE polyethylene resin
- Thickness: 20-200 um, grade-dependent
- Width: 100-2200 mm, customizable
- Color: Clear, translucent or customized
- Structure: Mono-layer or co-extruded film
- Supply format: Roll stock, tubing or lay-flat sheeting
-
Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.
-
- Material: PE protective film for temporary aluminum surface coverage
- Adhesive: Acrylic-based system with low, medium, or high tack options
- Colors: Clear, blue, white, black-and-white, or printed versions
- Thickness: Common custom range from 40 to 100 microns
- Width: Slit rolls and wide rolls up to 2600 mm
- Finish Match: Mill finish, anodized, brushed, painted, and powder-coated aluminum
