No products were found matching your selection.
Other Related Products
-
- Material: PE film
- Adhesive: acrylic pressure-sensitive adhesive
- Common colors: clear, blue, milky white
- Common thickness: 30–100 micron
- Roll format: slit rolls, log rolls, jumbo rolls
- Suitable surfaces: coated metal, stainless-look, plastic panels
-
An aluminum panel protective film application must keep the visible finish protected from lamination through fabrication, transport, installation and controlled removal. It is relevant to mill-finish, anodized, brushed, painted, powder-coated and coil-coated aluminum, including aluminum composite panels. The main risks are trapped particles, scratches, edge lift, film movement, difficult peeling, residue and coating appearance change. Selection should be based on the actual surface, coating condition, fabrication stress, expected exposure and removal stage—not thickness or tack alone—and should be confirmed through an actual-panel trial before full use.
-
PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.
-
- Material: removable PE protective film
- Surfaces: acrylic sheet, PMMA, plexiglass, smooth plastic sheet
- Colors: clear, blue, white, black-white, printed
- Thickness: 30-100 um by grade
- Adhesion: low, medium or adjusted tack
- Format: slit rolls with confirmed core and winding direction
-
- Material: Clear PET backing with silicone adhesive
- Color: Transparent clear
- Heat Reference: Around 150 C short-term exposure
- Test Option: 150 C / 30 min oven exposure
- Adhesion: Low to medium tack
- Format: Roll film with optional PET liner
-
- Material: Polyester film with silicone coating
- Coating: Single-side, double-side, differential release
- Color: Clear standard, tinted optional
- Roll format: Jumbo, slit, rewound roll
- Use: Adhesive converting, die cutting, laminating
- Applications: Tapes, labels, transfer adhesives
-
- Material: PET, polyester, polycarbonate, polyimide, or custom technical film
- Color: clear, translucent, matte, black, or custom tinted
- Common thickness: 25-250 microns
- Supply form: roll, sheet, slit roll, or converted format
- Surface option: plain, coated, adhesive-backed, or linered
- Typical use: stencil cutting, insulation parts, overlays, and protective processing
-
- Materials: PET, PE, PP, PVC, PC.
- Formats: roll stock, sheet, slit roll, cut-to-size.
- Thickness: 0.05 mm-2.00 mm typical range.
- Slit width: 200 mm-1200 mm typical range.
- Roll core: 3 inch or 6 inch.
- Surfaces: gloss, matte, frosted, textured, treated.
-
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Color: clear / transparent
- Thickness: 80–110 micron
- Roll Size: 600–1200 mm width, 50–500 m length
- Use: temporary protection for dry synthetic carpet
