No products were found matching your selection.

Other Related Products

  • PET Film Puncture Resistance Technical Data

    PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.

    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Self Adhesive Window Protection Film

    • Material: PE protective film
    • Adhesive: low tack acrylic pressure-sensitive adhesive
    • Common Colors: blue, clear, translucent
    • Common Thickness: 40–80 microns
    • Common Roll Width: 24 mm to 1240 mm
    • Typical Use: temporary protection for window glass and smooth frames
    Read moreDone

  • Electrical Grade PET Film

    • Material: Biaxially oriented PET polyester film
    • Color: Milky white, hazy white, or natural clear by grade
    • Thickness: 50 um – 350 um
    • Width: Slit roll or master roll, custom width available
    • Surface: Untreated, corona treated, or chemically treated
    • Main use: Motors, transformers, FPC, FFC, and electrical gaskets
    Read moreDone
  • Placeholder

    Biaxially Oriented Polyethylene Film

    • Material: Biaxially oriented polyethylene
    • Appearance: Clear or high-gloss
    • Typical thickness: 18-40 um, grade dependent
    • Width: Master rolls and custom slit rolls
    • Surface treatment: One-side or two-side corona treatment
    • Grade options: Printing, laminating, sealable or non-sealable
    Read moreDone

  • PET Silicone Coated Release Film

    • Base film: clear PET liner
    • Thickness: 12-100 um
    • Width: slit or jumbo roll
    • Color: transparent or light translucent
    • Coating: silicone release layer
    • Use: tapes, labels, die-cut parts
    Read moreDone

  • Carpet Floor Protection Film

    • Material: PE protective film
    • Adhesive: acrylic pressure-sensitive adhesive
    • Color: clear / transparent
    • Thickness: 80–110 micron
    • Roll Size: 600–1200 mm width, 50–500 m length
    • Use: temporary protection for dry synthetic carpet
    Read moreDone

  • Transparent Conductive Ito PET Film

    • Material: PET substrate with ITO conductive layer
    • Conductive Side: Single-side ITO coating
    • Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
    • Light Transmittance: Typically >=82%
    • Film Thickness: 125 um or 175 um PET
    • Format: ITO PET roll or ITO PET sheet
    Read moreDone

  • PE Thermoplastic Adhesive Film for Heat Lamination and Bonding

    • Material: PE / modified polyolefin hot melt adhesive film
    • Color: Milky white, translucent, or natural by grade
    • Thickness: Commonly 20 um-200 um, adjustable by structure
    • Supply: Full roll, slit roll, sheet, or die-cut piece
    • Liner: Release paper, release film, or liner-free option
    • Use: Heat lamination, hot pressing, and industrial assembly
    Read moreDone