No products were found matching your selection.

Other Related Products

  • PET Film Puncture Resistance Technical Data

    PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.

    Read moreDone

  • Adhesive Plastic Sheet for Mounting and Lamination

    • Materials: PET, PE, PVC sheet
    • Adhesive: acrylic PSA
    • Color: clear, white, black, custom
    • Form: sheets, cut pieces, die-cut parts
    • Liner: paper or PET release liner
    • Use: mounting, lamination, assembly
    Read moreDone

  • Custom Protective Film For Aluminum

    • Material: PE protective film for temporary aluminum surface coverage
    • Adhesive: Acrylic-based system with low, medium, or high tack options
    • Colors: Clear, blue, white, black-and-white, or printed versions
    • Thickness: Common custom range from 40 to 100 microns
    • Width: Slit rolls and wide rolls up to 2600 mm
    • Finish Match: Mill finish, anodized, brushed, painted, and powder-coated aluminum
    Read moreDone

  • Glossy Clear PET Film for Labels, Overlays and Lamination

    • Material: Clear BOPET / polyester
    • Surface: Glossy clear side
    • Thickness: 12-100 um
    • Common grades: 23 um, 36 um, 50 um
    • Format: Jumbo or slit rolls
    • Treatment: Corona or top-coated option
    Read moreDone

  • Laser Cut Plastic Film

    • Material: PET, polyester, polycarbonate, polyimide, or custom technical film
    • Color: clear, translucent, matte, black, or custom tinted
    • Common thickness: 25-250 microns
    • Supply form: roll, sheet, slit roll, or converted format
    • Surface option: plain, coated, adhesive-backed, or linered
    • Typical use: stencil cutting, insulation parts, overlays, and protective processing
    Read moreDone

  • PE Thermoplastic Adhesive Film for Heat Lamination and Bonding

    • Material: PE / modified polyolefin hot melt adhesive film
    • Color: Milky white, translucent, or natural by grade
    • Thickness: Commonly 20 um-200 um, adjustable by structure
    • Supply: Full roll, slit roll, sheet, or die-cut piece
    • Liner: Release paper, release film, or liner-free option
    • Use: Heat lamination, hot pressing, and industrial assembly
    Read moreDone

  • Refrigerator Adhesive Film

    • Material: PE film
    • Adhesive: acrylic pressure-sensitive adhesive
    • Common colors: clear, blue, milky white
    • Common thickness: 30–100 micron
    • Roll format: slit rolls, log rolls, jumbo rolls
    • Suitable surfaces: coated metal, stainless-look, plastic panels
    Read moreDone

  • Transparent Conductive Ito PET Film

    • Material: PET substrate with ITO conductive layer
    • Conductive Side: Single-side ITO coating
    • Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
    • Light Transmittance: Typically >=82%
    • Film Thickness: 125 um or 175 um PET
    • Format: ITO PET roll or ITO PET sheet
    Read moreDone

  • Fire Retardant Polyethylene Film

    • Material: LDPE/PE with flame-retardant additive system
    • Thickness: 50-250 um / 4-10 mil typical range
    • Width: 1 m-4 m rolls, slit width available
    • Colors: orange, white, natural translucent, opaque
    • Roll length: 25 m, 50 m, 100 ft, or specified length
    • Options: warning print, anti-static, UV grade after test confirmation
    Read moreDone