No products were found matching your selection.

Other Related Products

  • AC Duct Protection Film

    • Material: 3-4 mil PE/LDPE film
    • Adhesive: water-based acrylic high tack
    • Width: 24 inch, 36 inch, 48 inch
    • Color: blue or clear
    • Testing: 24-72 hour edge-lift and residue check
    • Options: perforation for repeated duct openings
    Read moreDone

  • Polyethylene Film Vapor Retarder: ASTM E1745 Technical Data

    This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.

    Read moreDone

  • Matte Stainless Steel Protective Film

    • Material: PE protective film
    • Adhesive: acrylic pressure-sensitive adhesive
    • Colors: transparent, blue, black & white
    • Thickness: 25–120 microns
    • Tack level: low, medium, or high
    • Suitable surfaces: matte, satin, and brushed stainless steel
    Read moreDone

  • Protective Film for Laser Engraving: Surface Compatibility and Clean-Removal Validation

    Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.

    Read moreDone

  • Inkjet Printable Polyester Film

    • Material: Coated PET polyester film
    • Base Color: Transparent / white PET
    • Common Thickness: 75um-175um
    • Surface: Glossy, matte, or semi-matte
    • Ink Use: Dye, pigment, aqueous, selected UV inkjet
    • Format: Roll or sheet supply
    Read moreDone

  • Self Adhesive Window Protection Film

    • Material: PE protective film
    • Adhesive: low tack acrylic pressure-sensitive adhesive
    • Common Colors: blue, clear, translucent
    • Common Thickness: 40–80 microns
    • Common Roll Width: 24 mm to 1240 mm
    • Typical Use: temporary protection for window glass and smooth frames
    Read moreDone
  • Placeholder

    Static Dissipative Polyethylene Film

    • Material: Non-adhesive LDPE, LLDPE, or PE blend
    • Appearance: Transparent, semi-transparent, or customized color
    • Formats: Flat film, tubing, sheeting, bags, and liner bags
    • ESD control: Grade-dependent dissipative performance
    • Processing: Slitting, heat sealing, bag making, and printing
    • Applications: IC, PCB, FPC, and electronic-component packaging
    Read moreDone

  • Matte Black Polyester Film

    • Material: PET / BOPET polyester film
    • Color: Deep matte black
    • Typical Thickness: 25 um to 188 um
    • Surface: One-side matte or two-side matte
    • Main Functions: Light blocking, insulation, die cutting
    • Typical Uses: Labels, gaskets, spacers, shielding parts
    Read moreDone

  • Furniture Plastic Film for Surface Protection and Decorative Lamination

    • Materials: PE, PVC, PET and PETG
    • Thickness: 30 um-600 um by grade
    • Finishes: clear, matte, high gloss, wood grain, skin-feel
    • Format: slit rolls, jumbo rolls or custom rolls
    • Uses: MDF, cabinet, wardrobe and tabletop panels
    • Checks: peel force, residue, edge lifting, color consistency
    Read moreDone