Adhesive Film For Composite Panel
- Material: PE film
- Adhesive: Acrylic-based adhesive
- Thickness: 30–100 microns
- Width: 100–1600 mm
- Color: Transparent, blue, black & white, custom print
- Use: Composite panel processing and temporary surface protection
No products were found matching your selection.
Other Related Products
-
-
Pressure Sensitive Polyester Film for Die-Cut Labels and Overlays
- Structure: PET carrier / acrylic PSA / release liner
- PET carrier: 25-125 um common range
- Color: clear, white, matte, or application-matched finish
- Adhesive: permanent or removable acrylic PSA
- Liner: PET, glassine, kraft, or silicone-coated liner
- Supply: jumbo roll, slit roll, narrow roll, or sheet-converted stock
-
Clear Protective Film Temperature – Technical Data & Heat Exposure Limits
Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.
-
a Pet Film For Thermoforming
- Material: APET / thermoforming PET
- Supply form: roll or sheet
- Common thickness: 150–1200 μm
- Color: clear, transparent, or custom tint
- Surface: smooth, glossy forming surface
- Main use: trays, blisters, clamshells, lids, inserts
-
Scratch Resistant Clear PET Film
- Material: hard-coated transparent PET film
- Thickness: 50-188 um, selected by coating grade
- Surface: clear gloss, low-haze hardcoat
- Hardcoat side: first visible surface
- Options: printable reverse, liner, adhesive-backed format
- Supply: slit rolls, sheets, die-cut overlay blanks
-
Custom Protective Film For Aluminum
- Material: PE protective film for temporary aluminum surface coverage
- Adhesive: Acrylic-based system with low, medium, or high tack options
- Colors: Clear, blue, white, black-and-white, or printed versions
- Thickness: Common custom range from 40 to 100 microns
- Width: Slit rolls and wide rolls up to 2600 mm
- Finish Match: Mill finish, anodized, brushed, painted, and powder-coated aluminum
-
Protective Film For Tiles
- Material: PE/LDPE temporary surface film
- Adhesive: Removable water-based acrylic adhesive
- Thickness: 40-120um typical
- Width: 100-2000mm, slit to order
- Colors: Transparent, blue, white, black-white
- Surfaces: Ceramic, porcelain, glazed, polished tiles
-
Machine Direction Oriented Polyethylene Films
- Material: PE-based monoaxially oriented film
- Appearance: Transparent, gloss, matte or application-specific finish
- Thickness: Grade-dependent; downgauged options by trial approval
- Width: Custom slit width for converting lines
- Treatment: Single-side or double-side corona treatment
- Supply Form: Finished rolls with confirmed winding direction
-
Clear Protective Film Solutions for Printed Graphics and Display Surfaces
A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.