No products were found matching your selection.

Other Related Products

  • Matte Stainless Steel Protective Film

    • Material: PE protective film
    • Adhesive: acrylic pressure-sensitive adhesive
    • Colors: transparent, blue, black & white
    • Thickness: 25–120 microns
    • Tack level: low, medium, or high
    • Suitable surfaces: matte, satin, and brushed stainless steel
    Read moreDone

  • PET Film Chemical Resistance Technical Data

    Chemical resistance PET film data is meaningful only when construction, reagent, concentration, contact method, temperature, and exposure time are defined. It applies to PET/BOPET base film, coated PET, and adhesive-backed protective film. Compare appearance, haze, mechanical retention, coating integrity, and peel behavior after exposure. Actual-substrate testing should confirm sensitive coatings, repeated cleaning, or delayed removal.

    Read moreDone

  • Transparent Conductive Ito PET Film

    • Material: PET substrate with ITO conductive layer
    • Conductive Side: Single-side ITO coating
    • Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
    • Light Transmittance: Typically >=82%
    • Film Thickness: 125 um or 175 um PET
    • Format: ITO PET roll or ITO PET sheet
    Read moreDone

  • Polyethylene Film Vapor Retarder: ASTM E1745 Technical Data

    This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.

    Read moreDone
  • Placeholder

    High Density Polyethylene Film

    • Material: High-density polyethylene (HDPE)
    • Forms: Film rolls, sheet rolls and cut sheets
    • Density: Grade-dependent, typically 0.94-0.97 g/cm3
    • Colors: Natural, milky white, black or custom color
    • Processing: Slitting, sheet cutting and optional perforation
    • Uses: Liners, separators and temporary barriers
    Read moreDone

  • High Temperature Clear Plastic Film

    • Material: Clear PET backing with silicone adhesive
    • Color: Transparent clear
    • Heat Reference: Around 150 C short-term exposure
    • Test Option: 150 C / 30 min oven exposure
    • Adhesion: Low to medium tack
    • Format: Roll film with optional PET liner
    Read moreDone

  • Die Cut Plastic Film Parts

    • Common thickness: 0.05-0.50 mm
    • Cut style: kiss-cut or through-cut
    • Shapes: tabs, strips, frames, windows, discs
    • Color: clear, white, black, amber, custom
    • Liner: PET liner, paper liner, split liner
    • Format: roll, sheet, or single piece
    Read moreDone

  • Self Adhesive Window Protection Film

    • Material: PE protective film
    • Adhesive: low tack acrylic pressure-sensitive adhesive
    • Common Colors: blue, clear, translucent
    • Common Thickness: 40–80 microns
    • Common Roll Width: 24 mm to 1240 mm
    • Typical Use: temporary protection for window glass and smooth frames
    Read moreDone

  • UV Stabilized Polyethylene Film for Outdoor Covering and Packaging

    • Material: LDPE, LLDPE, or PE blend
    • Thickness: 40 um-250 um
    • Width: slit rolls or wide sheeting
    • Color: clear, white, black, blue, or tinted
    • Format: single wound, center-folded, or sheets
    • Use: greenhouse, outdoor cover, packaging
    Read moreDone