No products were found matching your selection.

Other Related Products

  • AC Duct Protection Film

    • Material: 3-4 mil PE/LDPE film
    • Adhesive: water-based acrylic high tack
    • Width: 24 inch, 36 inch, 48 inch
    • Color: blue or clear
    • Testing: 24-72 hour edge-lift and residue check
    • Options: perforation for repeated duct openings
    Read moreDone

  • PE Thermoplastic Adhesive Film for Heat Lamination and Bonding

    • Material: PE / modified polyolefin hot melt adhesive film
    • Color: Milky white, translucent, or natural by grade
    • Thickness: Commonly 20 um-200 um, adjustable by structure
    • Supply: Full roll, slit roll, sheet, or die-cut piece
    • Liner: Release paper, release film, or liner-free option
    • Use: Heat lamination, hot pressing, and industrial assembly
    Read moreDone

  • High Temperature Clear Plastic Film

    • Material: Clear PET backing with silicone adhesive
    • Color: Transparent clear
    • Heat Reference: Around 150 C short-term exposure
    • Test Option: 150 C / 30 min oven exposure
    • Adhesion: Low to medium tack
    • Format: Roll film with optional PET liner
    Read moreDone

  • Double Sided OCA Film for Display Bonding

    • Material: optically clear acrylic OCA adhesive
    • Structure: no-substrate adhesive with PET release liners
    • Thickness: 25um-250um, grade-dependent
    • Appearance: transparent, low haze, clean surface
    • Format: roll, sheet, kiss-cut or die-cut part
    • Use: glass, touch layer, and display module bonding
    Read moreDone
  • Placeholder

    Silicone Coated Polyethylene Films

    • Base film: flexible LDPE or application-specific HDPE
    • Coating: single-side, double-side, or differential release
    • Release level: easy, medium, or tight grade
    • Supply format: master rolls or custom slit rolls
    • Roll setup: core size and silicone side in or out confirmed
    • Uses: tape, label, foam adhesive, and hygiene-material converting
    Read moreDone
  • Placeholder

    Machine Direction Oriented Polyethylene Films

    • Material: PE-based monoaxially oriented film
    • Appearance: Transparent, gloss, matte or application-specific finish
    • Thickness: Grade-dependent; downgauged options by trial approval
    • Width: Custom slit width for converting lines
    • Treatment: Single-side or double-side corona treatment
    • Supply Form: Finished rolls with confirmed winding direction
    Read moreDone

  • Aluminum Panel Protective Film Application: Fabrication, Installation and Clean Removal

    An aluminum panel protective film application must keep the visible finish protected from lamination through fabrication, transport, installation and controlled removal. It is relevant to mill-finish, anodized, brushed, painted, powder-coated and coil-coated aluminum, including aluminum composite panels. The main risks are trapped particles, scratches, edge lift, film movement, difficult peeling, residue and coating appearance change. Selection should be based on the actual surface, coating condition, fabrication stress, expected exposure and removal stage—not thickness or tack alone—and should be confirmed through an actual-panel trial before full use.

    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Self Adhesive Protective Film for Control Panels

    • Material: PETor PE
    • Color: Clear or matte
    • Adhesive: Acrylic
    • Tack Level: Low to medium
    • Thickness: 50-100 microns
    • Supply Form: Rolls, sheets, die-cut pieces
    Read moreDone