No products were found matching your selection.
Other Related Products
-
- Material: heat-stabilized PET polyester film
- Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
- Surface: corona treated, primer coated, or chemically treated
- Color: clear, slightly hazy, or white
- Ink fit: silver ink, carbon ink, dielectric ink
- Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
-
- Base film: clear PET liner
- Thickness: 12-100 um
- Width: slit or jumbo roll
- Color: transparent or light translucent
- Coating: silicone release layer
- Use: tapes, labels, die-cut parts
-
- Material: LDPE/PE with flame-retardant additive system
- Thickness: 50-250 um / 4-10 mil typical range
- Width: 1 m-4 m rolls, slit width available
- Colors: orange, white, natural translucent, opaque
- Roll length: 25 m, 50 m, 100 ft, or specified length
- Options: warning print, anti-static, UV grade after test confirmation
-
- Material: Biaxially oriented polyethylene
- Appearance: Clear or high-gloss
- Typical thickness: 18-40 um, grade dependent
- Width: Master rolls and custom slit rolls
- Surface treatment: One-side or two-side corona treatment
- Grade options: Printing, laminating, sealable or non-sealable
-
- Product Type: Clear adhesive film for graphic and photo mounting
- Manufacturer: Films Protective Company
- Appearance: Transparent adhesive layer with clear release liner
- Common Widths: 635 mm, 1040 mm, 1300 mm, 1520 mm, custom width available
- Application Method: Cold lamination, roller pressure, face mounting
- Main Uses: Acrylic photo panels, display boards, printed graphics, rigid presentation panels
-
- Material: Non-adhesive LDPE, LLDPE, or PE blend
- Appearance: Transparent, semi-transparent, or customized color
- Formats: Flat film, tubing, sheeting, bags, and liner bags
- ESD control: Grade-dependent dissipative performance
- Processing: Slitting, heat sealing, bag making, and printing
- Applications: IC, PCB, FPC, and electronic-component packaging
-
- Material: Soft LDPE roll film
- Appearance: Clear or natural translucent
- Thickness: 20-200 um typical range
- Width: 300-3000 mm typical range
- Formats: Single wound, double wound, centerfold, tubing
- Uses: Liners, wrapping, covers, heat-sealed converting
-
- Material: Polyester film with silicone coating
- Coating: Single-side, double-side, differential release
- Color: Clear standard, tinted optional
- Roll format: Jumbo, slit, rewound roll
- Use: Adhesive converting, die cutting, laminating
- Applications: Tapes, labels, transfer adhesives
-
Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.
