No products were found matching your selection.
Other Related Products
-
- Material: PE film
- Adhesive: acrylic pressure-sensitive adhesive
- Common colors: clear, blue, milky white
- Common thickness: 30–100 micron
- Roll format: slit rolls, log rolls, jumbo rolls
- Suitable surfaces: coated metal, stainless-look, plastic panels
-
- Material: APET / thermoforming PET
- Supply form: roll or sheet
- Common thickness: 150–1200 μm
- Color: clear, transparent, or custom tint
- Surface: smooth, glossy forming surface
- Main use: trays, blisters, clamshells, lids, inserts
-
- Material: Clear PET backing with silicone adhesive
- Color: Transparent clear
- Heat Reference: Around 150 C short-term exposure
- Test Option: 150 C / 30 min oven exposure
- Adhesion: Low to medium tack
- Format: Roll film with optional PET liner
-
- Material: PET, polyester, polycarbonate, polyimide, or custom technical film
- Color: clear, translucent, matte, black, or custom tinted
- Common thickness: 25-250 microns
- Supply form: roll, sheet, slit roll, or converted format
- Surface option: plain, coated, adhesive-backed, or linered
- Typical use: stencil cutting, insulation parts, overlays, and protective processing
-
- Material: PE / modified polyolefin hot melt adhesive film
- Color: Milky white, translucent, or natural by grade
- Thickness: Commonly 20 um-200 um, adjustable by structure
- Supply: Full roll, slit roll, sheet, or die-cut piece
- Liner: Release paper, release film, or liner-free option
- Use: Heat lamination, hot pressing, and industrial assembly
-
- Material: Biaxially oriented polyethylene
- Appearance: Clear or high-gloss
- Typical thickness: 18-40 um, grade dependent
- Width: Master rolls and custom slit rolls
- Surface treatment: One-side or two-side corona treatment
- Grade options: Printing, laminating, sealable or non-sealable
-
- Base film: flexible LDPE or application-specific HDPE
- Coating: single-side, double-side, or differential release
- Release level: easy, medium, or tight grade
- Supply format: master rolls or custom slit rolls
- Roll setup: core size and silicone side in or out confirmed
- Uses: tape, label, foam adhesive, and hygiene-material converting
-
Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.
-
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Color: clear / transparent
- Thickness: 80–110 micron
- Roll Size: 600–1200 mm width, 50–500 m length
- Use: temporary protection for dry synthetic carpet
