No products were found matching your selection.

Other Related Products

  • Double Sided OCA Film for Display Bonding

    • Material: optically clear acrylic OCA adhesive
    • Structure: no-substrate adhesive with PET release liners
    • Thickness: 25um-250um, grade-dependent
    • Appearance: transparent, low haze, clean surface
    • Format: roll, sheet, kiss-cut or die-cut part
    • Use: glass, touch layer, and display module bonding
    Read moreDone
  • Placeholder

    High Density Polyethylene Film

    • Material: High-density polyethylene (HDPE)
    • Forms: Film rolls, sheet rolls and cut sheets
    • Density: Grade-dependent, typically 0.94-0.97 g/cm3
    • Colors: Natural, milky white, black or custom color
    • Processing: Slitting, sheet cutting and optional perforation
    • Uses: Liners, separators and temporary barriers
    Read moreDone

  • Wafer Dicing Protective Film

    • Standard wafer sizes:4 inch, 6 inch, 8 inch, 12 inch
    • Film color:Blue transparent or clear
    • Backing material:PO, PVC, or PET-based film
    • Adhesive type:UV-sensitive acrylic adhesive
    • Process use:Wafer mounting, blade dicing, irradiation, die pick-up
    • Clean packaging:Individual roll pack, double anti-static PE bag, lot traceable
    Read moreDone
  • Placeholder

    String Reinforced Polyethylene Film

    • Material: PE film with embedded string or scrim reinforcement
    • Structure: square, diamond or diagonal grid options
    • Thickness: grade-dependent industrial range
    • Colors: clear, white and blue options
    • Supply: roll-wound or accordion-folded wide rolls
    • Options: UV-stabilized, FR / NFR and reinforced-edge grades
    Read moreDone

  • PET Silicone Coated Release Film

    • Base film: clear PET liner
    • Thickness: 12-100 um
    • Width: slit or jumbo roll
    • Color: transparent or light translucent
    • Coating: silicone release layer
    • Use: tapes, labels, die-cut parts
    Read moreDone
  • Placeholder

    Linear Low Density Polyethylene Film

    • Material: LLDPE polyethylene resin
    • Thickness: 20-200 um, grade-dependent
    • Width: 100-2200 mm, customizable
    • Color: Clear, translucent or customized
    • Structure: Mono-layer or co-extruded film
    • Supply format: Roll stock, tubing or lay-flat sheeting
    Read moreDone

  • Die Cut Plastic Film Parts

    • Common thickness: 0.05-0.50 mm
    • Cut style: kiss-cut or through-cut
    • Shapes: tabs, strips, frames, windows, discs
    • Color: clear, white, black, amber, custom
    • Liner: PET liner, paper liner, split liner
    • Format: roll, sheet, or single piece
    Read moreDone

  • a Pet Film For Thermoforming

    • Material: APET / thermoforming PET
    • Supply form: roll or sheet
    • Common thickness: 150–1200 μm
    • Color: clear, transparent, or custom tint
    • Surface: smooth, glossy forming surface
    • Main use: trays, blisters, clamshells, lids, inserts
    Read moreDone

  • PET Film Puncture Resistance Technical Data

    PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.

    Read moreDone