No products were found matching your selection.
Other Related Products
-
- Structure: PET carrier / acrylic PSA / release liner
- PET carrier: 25-125 um common range
- Color: clear, white, matte, or application-matched finish
- Adhesive: permanent or removable acrylic PSA
- Liner: PET, glassine, kraft, or silicone-coated liner
- Supply: jumbo roll, slit roll, narrow roll, or sheet-converted stock
-
Protective film for medical carpets is useful when controlled passages stay operational during personnel movement, trolley traffic, maintenance, or temporary installation work. The key is not maximum adhesion: film must remain stable at doors, turns, overlaps, and traffic hotspots while staying compatible with planned removal. Selection should balance carpet construction, surface treatment, traffic pattern, dwell time, environment, and operator method. In cleanroom or controlled areas, approve the system on the actual carpet before full-area application and retest when surface, traffic, or protection time changes.
-
- Material: PET base film with EVA adhesive layer
- Finish: Clear gloss or clear matte
- Thickness: 25um-250um roll thickness
- Temperature: 90C-120C typical range
- Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
- Use: Thermal print lamination and printed material protection
-
- Material: Clear PE protective film
- Adhesive: Low-to-medium tack acrylic
- Color: Transparent clear, custom tint optional
- Thickness: 50 um-100 um typical range
- Roll Width: 100 mm-1600 mm customizable
- Use: Outdoor-exposed window glass protection
-
- Backing: PE, PP, PET or woven reinforced film
- Adhesive: high-tack acrylic PSA
- Thickness: 70-250 um by grade
- Color: clear, white, milky white or custom tint
- Roll: slit or wide rolls, 3 inch core
- Use: mirror backside and painted glass backing
-
- Material: PE protective film
- Adhesive: removable water-based acrylic adhesive
- Color options: clear, blue, white
- Common thickness: 2.5-5 mil
- Common widths: 24″, 30″, 36″
- Use: temporary marble surface protection
-
- Product Type: Clear adhesive film for graphic and photo mounting
- Manufacturer: Films Protective Company
- Appearance: Transparent adhesive layer with clear release liner
- Common Widths: 635 mm, 1040 mm, 1300 mm, 1520 mm, custom width available
- Application Method: Cold lamination, roller pressure, face mounting
- Main Uses: Acrylic photo panels, display boards, printed graphics, rigid presentation panels
-
- Material: Heat stabilized PET polyester film
- Appearance: Clear or milky white available
- Thickness Range: 50um-350um typical
- Roll Format: Custom slit roll width
- Surface: Untreated, one-side treated, or two-side treated
- Main Use: FPC, printed electronics, insulation, coating, baking, lamination
-
- Material: LLDPE polyethylene resin
- Thickness: 20-200 um, grade-dependent
- Width: 100-2200 mm, customizable
- Color: Clear, translucent or customized
- Structure: Mono-layer or co-extruded film
- Supply format: Roll stock, tubing or lay-flat sheeting
