No products were found matching your selection.

Other Related Products

  • a Pet Film For Thermoforming

    • Material: APET / thermoforming PET
    • Supply form: roll or sheet
    • Common thickness: 150–1200 μm
    • Color: clear, transparent, or custom tint
    • Surface: smooth, glossy forming surface
    • Main use: trays, blisters, clamshells, lids, inserts
    Read moreDone

  • Protective Film for Laser Engraving: Surface Compatibility and Clean-Removal Validation

    Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.

    Read moreDone

  • Screen Protection Film Roll for Converting

    • Materials: PET, TPU, hydrogel structures
    • Width: 1040 mm, 1270 mm, custom
    • Length: 50 m, 100 m, custom
    • Color: Clear, matte, privacy
    • Thickness: 80-250 um typical
    • Format: Master roll or slit roll
    Read moreDone

  • Fire Retardant Polyethylene Film

    • Material: LDPE/PE with flame-retardant additive system
    • Thickness: 50-250 um / 4-10 mil typical range
    • Width: 1 m-4 m rolls, slit width available
    • Colors: orange, white, natural translucent, opaque
    • Roll length: 25 m, 50 m, 100 ft, or specified length
    • Options: warning print, anti-static, UV grade after test confirmation
    Read moreDone

  • High Temperature Clear Plastic Film

    • Material: Clear PET backing with silicone adhesive
    • Color: Transparent clear
    • Heat Reference: Around 150 C short-term exposure
    • Test Option: 150 C / 30 min oven exposure
    • Adhesion: Low to medium tack
    • Format: Roll film with optional PET liner
    Read moreDone

  • Electrical Grade PET Film

    • Material: Biaxially oriented PET polyester film
    • Color: Milky white, hazy white, or natural clear by grade
    • Thickness: 50 um – 350 um
    • Width: Slit roll or master roll, custom width available
    • Surface: Untreated, corona treated, or chemically treated
    • Main use: Motors, transformers, FPC, FFC, and electrical gaskets
    Read moreDone
  • Placeholder

    Silicone Coated Polyethylene Films

    • Base film: flexible LDPE or application-specific HDPE
    • Coating: single-side, double-side, or differential release
    • Release level: easy, medium, or tight grade
    • Supply format: master rolls or custom slit rolls
    • Roll setup: core size and silicone side in or out confirmed
    • Uses: tape, label, foam adhesive, and hygiene-material converting
    Read moreDone

  • Appliance Screen Protective Film

    • Material: PE film with removable pressure-sensitive adhesive
    • Color: clear, light blue, milky white, or custom tint
    • Thickness: typical 30-100 um, grade-dependent
    • Format: rolls, sheets, slit rolls, or die-cut pieces
    • Adhesion: low to low-medium tack for clean peeling
    • Use: appliance glass, display windows, glossy fascia, coated panels
    Read moreDone

  • Self Adhesive Protective Film for Control Panels

    • Material: PETor PE
    • Color: Clear or matte
    • Adhesive: Acrylic
    • Tack Level: Low to medium
    • Thickness: 50-100 microns
    • Supply Form: Rolls, sheets, die-cut pieces
    Read moreDone