No products were found matching your selection.
Other Related Products
-
- Material: PE-based monoaxially oriented film
- Appearance: Transparent, gloss, matte or application-specific finish
- Thickness: Grade-dependent; downgauged options by trial approval
- Width: Custom slit width for converting lines
- Treatment: Single-side or double-side corona treatment
- Supply Form: Finished rolls with confirmed winding direction
-
An aluminum panel protective film application must keep the visible finish protected from lamination through fabrication, transport, installation and controlled removal. It is relevant to mill-finish, anodized, brushed, painted, powder-coated and coil-coated aluminum, including aluminum composite panels. The main risks are trapped particles, scratches, edge lift, film movement, difficult peeling, residue and coating appearance change. Selection should be based on the actual surface, coating condition, fabrication stress, expected exposure and removal stage—not thickness or tack alone—and should be confirmed through an actual-panel trial before full use.
-
- Material: PET base film with EVA adhesive layer
- Finish: Clear gloss or clear matte
- Thickness: 25um-250um roll thickness
- Temperature: 90C-120C typical range
- Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
- Use: Thermal print lamination and printed material protection
-
- Material: optical PET with AF oleophobic surface
- Surface options: clear, matte, anti-glare
- Common thickness: 75 um, 100 um, 125 um
- Color: transparent or light matte
- Format: sheet or custom die-cut size
- Application: phone, tablet, POS and terminal screens
-
- Material: APET / thermoforming PET
- Supply form: roll or sheet
- Common thickness: 150–1200 μm
- Color: clear, transparent, or custom tint
- Surface: smooth, glossy forming surface
- Main use: trays, blisters, clamshells, lids, inserts
-
- Backing: PE, PP, PET or woven reinforced film
- Adhesive: high-tack acrylic PSA
- Thickness: 70-250 um by grade
- Color: clear, white, milky white or custom tint
- Roll: slit or wide rolls, 3 inch core
- Use: mirror backside and painted glass backing
-
A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.
-
- Base film: clear PET liner
- Thickness: 12-100 um
- Width: slit or jumbo roll
- Color: transparent or light translucent
- Coating: silicone release layer
- Use: tapes, labels, die-cut parts
-
- Material: Coated PET polyester film
- Base Color: Transparent / white PET
- Common Thickness: 75um-175um
- Surface: Glossy, matte, or semi-matte
- Ink Use: Dye, pigment, aqueous, selected UV inkjet
- Format: Roll or sheet supply
