No products were found matching your selection.

Other Related Products

  • Marble Countertop Protection Film

    • Material: PE protective film
    • Adhesive: removable water-based acrylic adhesive
    • Color options: clear, blue, white
    • Common thickness: 2.5-5 mil
    • Common widths: 24″, 30″, 36″
    • Use: temporary marble surface protection
    Read moreDone

  • Wafer Dicing Protective Film

    • Standard wafer sizes:4 inch, 6 inch, 8 inch, 12 inch
    • Film color:Blue transparent or clear
    • Backing material:PO, PVC, or PET-based film
    • Adhesive type:UV-sensitive acrylic adhesive
    • Process use:Wafer mounting, blade dicing, irradiation, die pick-up
    • Clean packaging:Individual roll pack, double anti-static PE bag, lot traceable
    Read moreDone

  • Fire Retardant Polyethylene Film

    • Material: LDPE/PE with flame-retardant additive system
    • Thickness: 50-250 um / 4-10 mil typical range
    • Width: 1 m-4 m rolls, slit width available
    • Colors: orange, white, natural translucent, opaque
    • Roll length: 25 m, 50 m, 100 ft, or specified length
    • Options: warning print, anti-static, UV grade after test confirmation
    Read moreDone

  • Optically Clear Mount Film for Acrylic Photo Mounting

    • Product Type: Clear adhesive film for graphic and photo mounting
    • Manufacturer: Films Protective Company
    • Appearance: Transparent adhesive layer with clear release liner
    • Common Widths: 635 mm, 1040 mm, 1300 mm, 1520 mm, custom width available
    • Application Method: Cold lamination, roller pressure, face mounting
    • Main Uses: Acrylic photo panels, display boards, printed graphics, rigid presentation panels
    Read moreDone

  • Polyester Film For Lamination

    • Material: PET base film with EVA adhesive layer
    • Finish: Clear gloss or clear matte
    • Thickness: 25um-250um roll thickness
    • Temperature: 90C-120C typical range
    • Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
    • Use: Thermal print lamination and printed material protection
    Read moreDone
  • Placeholder

    Linear Low Density Polyethylene Film

    • Material: LLDPE polyethylene resin
    • Thickness: 20-200 um, grade-dependent
    • Width: 100-2200 mm, customizable
    • Color: Clear, translucent or customized
    • Structure: Mono-layer or co-extruded film
    • Supply format: Roll stock, tubing or lay-flat sheeting
    Read moreDone

  • Custom Protective Film For Aluminum

    • Material: PE protective film for temporary aluminum surface coverage
    • Adhesive: Acrylic-based system with low, medium, or high tack options
    • Colors: Clear, blue, white, black-and-white, or printed versions
    • Thickness: Common custom range from 40 to 100 microns
    • Width: Slit rolls and wide rolls up to 2600 mm
    • Finish Match: Mill finish, anodized, brushed, painted, and powder-coated aluminum
    Read moreDone

  • High Temperature Clear Plastic Film

    • Material: Clear PET backing with silicone adhesive
    • Color: Transparent clear
    • Heat Reference: Around 150 C short-term exposure
    • Test Option: 150 C / 30 min oven exposure
    • Adhesion: Low to medium tack
    • Format: Roll film with optional PET liner
    Read moreDone

  • Clear Protective Film Temperature – Technical Data & Heat Exposure Limits

    Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.

    Read moreDone