No products were found matching your selection.
Other Related Products
-
- Material: PE/LDPE temporary surface film
- Adhesive: Removable water-based acrylic adhesive
- Thickness: 40-120um typical
- Width: 100-2000mm, slit to order
- Colors: Transparent, blue, white, black-white
- Surfaces: Ceramic, porcelain, glazed, polished tiles
-
- Material: Clear BOPET / polyester
- Surface: Glossy clear side
- Thickness: 12-100 um
- Common grades: 23 um, 36 um, 50 um
- Format: Jumbo or slit rolls
- Treatment: Corona or top-coated option
-
- Base film: clear PET liner
- Thickness: 12-100 um
- Width: slit or jumbo roll
- Color: transparent or light translucent
- Coating: silicone release layer
- Use: tapes, labels, die-cut parts
-
A clear film to protect graphics should keep printed and display-facing surfaces visible while reducing scratches, dust, fingerprints, and handling marks during converting, assembly, storage, transport, or installation. Key risks are trapped particles, edge lift, adhesive transfer, ink lift, bubbles, haze, and appearance change after removal. Selection depends on contact surface, holding force, dwell, exposure, visibility, and removal stage. Because inks, coatings, acrylics, overlays, and display surfaces behave differently, representative sample testing is recommended when the surface, process, or protection time changes.
-
- Common thickness:20-300 um, ACP grades often 20-150 um
- Available width:300-3000 mm, slit rolls for panel lamination lines
- Resin options:EAA, EVA, PES, PO, and modified polyolefin
- Color:Transparent, translucent, milky white, or resin-dependent
- Structure:Glassine release paper or linerless roll format
- Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
-
- Material: Non-adhesive LDPE, LLDPE, or PE blend
- Appearance: Transparent, semi-transparent, or customized color
- Formats: Flat film, tubing, sheeting, bags, and liner bags
- ESD control: Grade-dependent dissipative performance
- Processing: Slitting, heat sealing, bag making, and printing
- Applications: IC, PCB, FPC, and electronic-component packaging
-
- Material: 3-4 mil PE/LDPE film
- Adhesive: water-based acrylic high tack
- Width: 24 inch, 36 inch, 48 inch
- Color: blue or clear
- Testing: 24-72 hour edge-lift and residue check
- Options: perforation for repeated duct openings
-
PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.
-
- Material: PE / polyethylene film with removable pressure-sensitive adhesive
- Thickness: commonly 30-120 um, depending on grade
- Adhesion: low tack, medium tack, and high tack options
- Colors: clear, blue, white, black-white, or printed film
- Roll format: custom slit width, roll length, core size, and winding direction
- Use: temporary surface protection during stamping, bending, shearing, handling, and transport
