No products were found matching your selection.

Other Related Products

  • Furniture Plastic Film for Surface Protection and Decorative Lamination

    • Materials: PE, PVC, PET and PETG
    • Thickness: 30 um-600 um by grade
    • Finishes: clear, matte, high gloss, wood grain, skin-feel
    • Format: slit rolls, jumbo rolls or custom rolls
    • Uses: MDF, cabinet, wardrobe and tabletop panels
    • Checks: peel force, residue, edge lifting, color consistency
    Read moreDone

  • Anti Static Adhesive Film

    • Material: PET or PE film
    • Adhesive: Acrylic or silicone PSA
    • Color: Clear, light blue, or custom
    • Thickness: 50um, 75um, 100um, or custom
    • Surface Resistance: 10^5-10^11 ohms by grade
    • Use: PCB, FPC, panel, IC carrier, electronics turnover
    Read moreDone

  • Scratch Resistant Clear PET Film

    • Material: hard-coated transparent PET film
    • Thickness: 50-188 um, selected by coating grade
    • Surface: clear gloss, low-haze hardcoat
    • Hardcoat side: first visible surface
    • Options: printable reverse, liner, adhesive-backed format
    • Supply: slit rolls, sheets, die-cut overlay blanks
    Read moreDone

  • Polyester Film Heat Stabilized

    • Material: Heat stabilized PET polyester film
    • Appearance: Clear or milky white available
    • Thickness Range: 50um-350um typical
    • Roll Format: Custom slit roll width
    • Surface: Untreated, one-side treated, or two-side treated
    • Main Use: FPC, printed electronics, insulation, coating, baking, lamination
    Read moreDone
  • Placeholder

    Biaxially Oriented Polyethylene Film

    • Material: Biaxially oriented polyethylene
    • Appearance: Clear or high-gloss
    • Typical thickness: 18-40 um, grade dependent
    • Width: Master rolls and custom slit rolls
    • Surface treatment: One-side or two-side corona treatment
    • Grade options: Printing, laminating, sealable or non-sealable
    Read moreDone

  • Carpet Floor Protection Film

    • Material: PE protective film
    • Adhesive: acrylic pressure-sensitive adhesive
    • Color: clear / transparent
    • Thickness: 80–110 micron
    • Roll Size: 600–1200 mm width, 50–500 m length
    • Use: temporary protection for dry synthetic carpet
    Read moreDone

  • Removable PE Protective Film for Metal Surfaces

    • Material: PE / polyethylene film with removable pressure-sensitive adhesive
    • Thickness: commonly 30-120 um, depending on grade
    • Adhesion: low tack, medium tack, and high tack options
    • Colors: clear, blue, white, black-white, or printed film
    • Roll format: custom slit width, roll length, core size, and winding direction
    • Use: temporary surface protection during stamping, bending, shearing, handling, and transport
    Read moreDone

  • Polyethylene Film Vapor Retarder: ASTM E1745 Technical Data

    This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.

    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone