No products were found matching your selection.
Other Related Products
-
- Material: PET / BOPET polyester film
- Color: Deep matte black
- Typical Thickness: 25 um to 188 um
- Surface: One-side matte or two-side matte
- Main Functions: Light blocking, insulation, die cutting
- Typical Uses: Labels, gaskets, spacers, shielding parts
-
- Material: heat-stabilized PET polyester film
- Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
- Surface: corona treated, primer coated, or chemically treated
- Color: clear, slightly hazy, or white
- Ink fit: silver ink, carbon ink, dielectric ink
- Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
-
- Material: PE film with removable pressure-sensitive adhesive
- Color: clear, light blue, milky white, or custom tint
- Thickness: typical 30-100 um, grade-dependent
- Format: rolls, sheets, slit rolls, or die-cut pieces
- Adhesion: low to low-medium tack for clean peeling
- Use: appliance glass, display windows, glossy fascia, coated panels
-
- Material: Heat stabilized PET polyester film
- Appearance: Clear or milky white available
- Thickness Range: 50um-350um typical
- Roll Format: Custom slit roll width
- Surface: Untreated, one-side treated, or two-side treated
- Main Use: FPC, printed electronics, insulation, coating, baking, lamination
-
- Material: Biaxially oriented PET polyester film
- Color: Milky white, hazy white, or natural clear by grade
- Thickness: 50 um – 350 um
- Width: Slit roll or master roll, custom width available
- Surface: Untreated, corona treated, or chemically treated
- Main use: Motors, transformers, FPC, FFC, and electrical gaskets
-
- Structure: PET carrier / acrylic PSA / release liner
- PET carrier: 25-125 um common range
- Color: clear, white, matte, or application-matched finish
- Adhesive: permanent or removable acrylic PSA
- Liner: PET, glassine, kraft, or silicone-coated liner
- Supply: jumbo roll, slit roll, narrow roll, or sheet-converted stock
-
Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.
-
- Standard wafer sizes:4 inch, 6 inch, 8 inch, 12 inch
- Film color:Blue transparent or clear
- Backing material:PO, PVC, or PET-based film
- Adhesive type:UV-sensitive acrylic adhesive
- Process use:Wafer mounting, blade dicing, irradiation, die pick-up
- Clean packaging:Individual roll pack, double anti-static PE bag, lot traceable
-
- Material: Biaxially oriented polyethylene
- Appearance: Clear or high-gloss
- Typical thickness: 18-40 um, grade dependent
- Width: Master rolls and custom slit rolls
- Surface treatment: One-side or two-side corona treatment
- Grade options: Printing, laminating, sealable or non-sealable
