No products were found matching your selection.

Other Related Products

  • Optically Clear Mount Film for Acrylic Photo Mounting

    • Product Type: Clear adhesive film for graphic and photo mounting
    • Manufacturer: Films Protective Company
    • Appearance: Transparent adhesive layer with clear release liner
    • Common Widths: 635 mm, 1040 mm, 1300 mm, 1520 mm, custom width available
    • Application Method: Cold lamination, roller pressure, face mounting
    • Main Uses: Acrylic photo panels, display boards, printed graphics, rigid presentation panels
    Read moreDone

  • UV Blocking Window Protection Film

    • Material: Clear PE protective film
    • Adhesive: Low-to-medium tack acrylic
    • Color: Transparent clear, custom tint optional
    • Thickness: 50 um-100 um typical range
    • Roll Width: 100 mm-1600 mm customizable
    • Use: Outdoor-exposed window glass protection
    Read moreDone

  • Transparent Conductive Ito PET Film

    • Material: PET substrate with ITO conductive layer
    • Conductive Side: Single-side ITO coating
    • Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
    • Light Transmittance: Typically >=82%
    • Film Thickness: 125 um or 175 um PET
    • Format: ITO PET roll or ITO PET sheet
    Read moreDone

  • Anti Static Adhesive Film

    • Material: PET or PE film
    • Adhesive: Acrylic or silicone PSA
    • Color: Clear, light blue, or custom
    • Thickness: 50um, 75um, 100um, or custom
    • Surface Resistance: 10^5-10^11 ohms by grade
    • Use: PCB, FPC, panel, IC carrier, electronics turnover
    Read moreDone

  • Scratch Resistant Clear PET Film

    • Material: hard-coated transparent PET film
    • Thickness: 50-188 um, selected by coating grade
    • Surface: clear gloss, low-haze hardcoat
    • Hardcoat side: first visible surface
    • Options: printable reverse, liner, adhesive-backed format
    • Supply: slit rolls, sheets, die-cut overlay blanks
    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Protective Film for Laser Engraving: Surface Compatibility and Clean-Removal Validation

    Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.

    Read moreDone

  • Protective Film for Acrylic Sheet and PMMA Surface Protection

    • Material: removable PE protective film
    • Surfaces: acrylic sheet, PMMA, plexiglass, smooth plastic sheet
    • Colors: clear, blue, white, black-white, printed
    • Thickness: 30-100 um by grade
    • Adhesion: low, medium or adjusted tack
    • Format: slit rolls with confirmed core and winding direction
    Read moreDone

  • Custom Plastic Sheet and Film Materials

    • Materials: PET, PE, PP, PVC, PC.
    • Formats: roll stock, sheet, slit roll, cut-to-size.
    • Thickness: 0.05 mm-2.00 mm typical range.
    • Slit width: 200 mm-1200 mm typical range.
    • Roll core: 3 inch or 6 inch.
    • Surfaces: gloss, matte, frosted, textured, treated.
    Read moreDone