No products were found matching your selection.
Other Related Products
-
- Material: LDPE, LLDPE, or PE blend
- Thickness: 40 um-250 um
- Width: slit rolls or wide sheeting
- Color: clear, white, black, blue, or tinted
- Format: single wound, center-folded, or sheets
- Use: greenhouse, outdoor cover, packaging
-
- Materials: PET, PE, PP, PVC, PC.
- Formats: roll stock, sheet, slit roll, cut-to-size.
- Thickness: 0.05 mm-2.00 mm typical range.
- Slit width: 200 mm-1200 mm typical range.
- Roll core: 3 inch or 6 inch.
- Surfaces: gloss, matte, frosted, textured, treated.
-
- Material: heat-stabilized PET polyester film
- Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
- Surface: corona treated, primer coated, or chemically treated
- Color: clear, slightly hazy, or white
- Ink fit: silver ink, carbon ink, dielectric ink
- Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
-
- Material: PET or PE film
- Adhesive: Acrylic or silicone PSA
- Color: Clear, light blue, or custom
- Thickness: 50um, 75um, 100um, or custom
- Surface Resistance: 10^5-10^11 ohms by grade
- Use: PCB, FPC, panel, IC carrier, electronics turnover
-
- Material: Heat stabilized PET polyester film
- Appearance: Clear or milky white available
- Thickness Range: 50um-350um typical
- Roll Format: Custom slit roll width
- Surface: Untreated, one-side treated, or two-side treated
- Main Use: FPC, printed electronics, insulation, coating, baking, lamination
-
- Base film: clear PET liner
- Thickness: 12-100 um
- Width: slit or jumbo roll
- Color: transparent or light translucent
- Coating: silicone release layer
- Use: tapes, labels, die-cut parts
-
- Materials: PE, PVC, PET and PETG
- Thickness: 30 um-600 um by grade
- Finishes: clear, matte, high gloss, wood grain, skin-feel
- Format: slit rolls, jumbo rolls or custom rolls
- Uses: MDF, cabinet, wardrobe and tabletop panels
- Checks: peel force, residue, edge lifting, color consistency
-
- Material: hard-coated transparent PET film
- Thickness: 50-188 um, selected by coating grade
- Surface: clear gloss, low-haze hardcoat
- Hardcoat side: first visible surface
- Options: printable reverse, liner, adhesive-backed format
- Supply: slit rolls, sheets, die-cut overlay blanks
-
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
