No products were found matching your selection.

Other Related Products

  • Adhesive Plastic Sheet for Mounting and Lamination

    • Materials: PET, PE, PVC sheet
    • Adhesive: acrylic PSA
    • Color: clear, white, black, custom
    • Form: sheets, cut pieces, die-cut parts
    • Liner: paper or PET release liner
    • Use: mounting, lamination, assembly
    Read moreDone

  • AC Duct Protection Film

    • Material: 3-4 mil PE/LDPE film
    • Adhesive: water-based acrylic high tack
    • Width: 24 inch, 36 inch, 48 inch
    • Color: blue or clear
    • Testing: 24-72 hour edge-lift and residue check
    • Options: perforation for repeated duct openings
    Read moreDone

  • PET Film Puncture Resistance Technical Data

    PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use.

    Read moreDone

  • Self Adhesive Window Protection Film

    • Material: PE protective film
    • Adhesive: low tack acrylic pressure-sensitive adhesive
    • Common Colors: blue, clear, translucent
    • Common Thickness: 40–80 microns
    • Common Roll Width: 24 mm to 1240 mm
    • Typical Use: temporary protection for window glass and smooth frames
    Read moreDone

  • Anti Fingerprint Protective Screen Film

    • Material: optical PET with AF oleophobic surface
    • Surface options: clear, matte, anti-glare
    • Common thickness: 75 um, 100 um, 125 um
    • Color: transparent or light matte
    • Format: sheet or custom die-cut size
    • Application: phone, tablet, POS and terminal screens
    Read moreDone
  • Placeholder

    String Reinforced Polyethylene Film

    • Material: PE film with embedded string or scrim reinforcement
    • Structure: square, diamond or diagonal grid options
    • Thickness: grade-dependent industrial range
    • Colors: clear, white and blue options
    • Supply: roll-wound or accordion-folded wide rolls
    • Options: UV-stabilized, FR / NFR and reinforced-edge grades
    Read moreDone

  • Protective Film for Laser Engraving: Surface Compatibility and Clean-Removal Validation

    Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.

    Read moreDone

  • Transparent Conductive Ito PET Film

    • Material: PET substrate with ITO conductive layer
    • Conductive Side: Single-side ITO coating
    • Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
    • Light Transmittance: Typically >=82%
    • Film Thickness: 125 um or 175 um PET
    • Format: ITO PET roll or ITO PET sheet
    Read moreDone

  • Anti Static Adhesive Film

    • Material: PET or PE film
    • Adhesive: Acrylic or silicone PSA
    • Color: Clear, light blue, or custom
    • Thickness: 50um, 75um, 100um, or custom
    • Surface Resistance: 10^5-10^11 ohms by grade
    • Use: PCB, FPC, panel, IC carrier, electronics turnover
    Read moreDone