No products were found matching your selection.
Other Related Products
-
- Material: PET or PE film
- Adhesive: Acrylic or silicone PSA
- Color: Clear, light blue, or custom
- Thickness: 50um, 75um, 100um, or custom
- Surface Resistance: 10^5-10^11 ohms by grade
- Use: PCB, FPC, panel, IC carrier, electronics turnover
-
- Material: Heat stabilized PET polyester film
- Appearance: Clear or milky white available
- Thickness Range: 50um-350um typical
- Roll Format: Custom slit roll width
- Surface: Untreated, one-side treated, or two-side treated
- Main Use: FPC, printed electronics, insulation, coating, baking, lamination
-
- Material: Soft LDPE roll film
- Appearance: Clear or natural translucent
- Thickness: 20-200 um typical range
- Width: 300-3000 mm typical range
- Formats: Single wound, double wound, centerfold, tubing
- Uses: Liners, wrapping, covers, heat-sealed converting
-
- Material: removable PE protective film
- Surfaces: acrylic sheet, PMMA, plexiglass, smooth plastic sheet
- Colors: clear, blue, white, black-white, printed
- Thickness: 30-100 um by grade
- Adhesion: low, medium or adjusted tack
- Format: slit rolls with confirmed core and winding direction
-
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
-
- Material: PE / polyethylene film with removable pressure-sensitive adhesive
- Thickness: commonly 30-120 um, depending on grade
- Adhesion: low tack, medium tack, and high tack options
- Colors: clear, blue, white, black-white, or printed film
- Roll format: custom slit width, roll length, core size, and winding direction
- Use: temporary surface protection during stamping, bending, shearing, handling, and transport
-
- Material: optical PET with AF oleophobic surface
- Surface options: clear, matte, anti-glare
- Common thickness: 75 um, 100 um, 125 um
- Color: transparent or light matte
- Format: sheet or custom die-cut size
- Application: phone, tablet, POS and terminal screens
-
- Material: Biaxially oriented PET polyester film
- Color: Milky white, hazy white, or natural clear by grade
- Thickness: 50 um – 350 um
- Width: Slit roll or master roll, custom width available
- Surface: Untreated, corona treated, or chemically treated
- Main use: Motors, transformers, FPC, FFC, and electrical gaskets
-
- Material: High-density polyethylene (HDPE)
- Forms: Film rolls, sheet rolls and cut sheets
- Density: Grade-dependent, typically 0.94-0.97 g/cm3
- Colors: Natural, milky white, black or custom color
- Processing: Slitting, sheet cutting and optional perforation
- Uses: Liners, separators and temporary barriers
