Adhesive Plastic Sheet for Mounting and Lamination
- Materials: PET, PE, PVC sheet
- Adhesive: acrylic PSA
- Color: clear, white, black, custom
- Form: sheets, cut pieces, die-cut parts
- Liner: paper or PET release liner
- Use: mounting, lamination, assembly
No products were found matching your selection.
Other Related Products
-
-
High Density Polyethylene Film
- Material: High-density polyethylene (HDPE)
- Forms: Film rolls, sheet rolls and cut sheets
- Density: Grade-dependent, typically 0.94-0.97 g/cm3
- Colors: Natural, milky white, black or custom color
- Processing: Slitting, sheet cutting and optional perforation
- Uses: Liners, separators and temporary barriers
-
AC Duct Protection Film
- Material: 3-4 mil PE/LDPE film
- Adhesive: water-based acrylic high tack
- Width: 24 inch, 36 inch, 48 inch
- Color: blue or clear
- Testing: 24-72 hour edge-lift and residue check
- Options: perforation for repeated duct openings
-
Carpet Floor Protection Film
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Color: clear / transparent
- Thickness: 80–110 micron
- Roll Size: 600–1200 mm width, 50–500 m length
- Use: temporary protection for dry synthetic carpet
-
Hot Melt Adhesive Film For Aluminum
- Common thickness:20-300 um, ACP grades often 20-150 um
- Available width:300-3000 mm, slit rolls for panel lamination lines
- Resin options:EAA, EVA, PES, PO, and modified polyolefin
- Color:Transparent, translucent, milky white, or resin-dependent
- Structure:Glassine release paper or linerless roll format
- Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
-
Scratch Resistant Clear PET Film
- Material: hard-coated transparent PET film
- Thickness: 50-188 um, selected by coating grade
- Surface: clear gloss, low-haze hardcoat
- Hardcoat side: first visible surface
- Options: printable reverse, liner, adhesive-backed format
- Supply: slit rolls, sheets, die-cut overlay blanks
-
Self Adhesive Protective Film for Control Panels
- Material: PETor PE
- Color: Clear or matte
- Adhesive: Acrylic
- Tack Level: Low to medium
- Thickness: 50-100 microns
- Supply Form: Rolls, sheets, die-cut pieces
-
Matte Stainless Steel Protective Film
- Material: PE protective film
- Adhesive: acrylic pressure-sensitive adhesive
- Colors: transparent, blue, black & white
- Thickness: 25–120 microns
- Tack level: low, medium, or high
- Suitable surfaces: matte, satin, and brushed stainless steel
-
Pressure Sensitive Polyester Film for Die-Cut Labels and Overlays
- Structure: PET carrier / acrylic PSA / release liner
- PET carrier: 25-125 um common range
- Color: clear, white, matte, or application-matched finish
- Adhesive: permanent or removable acrylic PSA
- Liner: PET, glassine, kraft, or silicone-coated liner
- Supply: jumbo roll, slit roll, narrow roll, or sheet-converted stock