No products were found matching your selection.

Other Related Products

  • PET Silicone Coated Release Film

    • Base film: clear PET liner
    • Thickness: 12-100 um
    • Width: slit or jumbo roll
    • Color: transparent or light translucent
    • Coating: silicone release layer
    • Use: tapes, labels, die-cut parts
    Read moreDone

  • Optically Clear Mount Film for Acrylic Photo Mounting

    • Product Type: Clear adhesive film for graphic and photo mounting
    • Manufacturer: Films Protective Company
    • Appearance: Transparent adhesive layer with clear release liner
    • Common Widths: 635 mm, 1040 mm, 1300 mm, 1520 mm, custom width available
    • Application Method: Cold lamination, roller pressure, face mounting
    • Main Uses: Acrylic photo panels, display boards, printed graphics, rigid presentation panels
    Read moreDone

  • Matte Black Polyester Film

    • Material: PET / BOPET polyester film
    • Color: Deep matte black
    • Typical Thickness: 25 um to 188 um
    • Surface: One-side matte or two-side matte
    • Main Functions: Light blocking, insulation, die cutting
    • Typical Uses: Labels, gaskets, spacers, shielding parts
    Read moreDone

  • Double Sided OCA Film for Display Bonding

    • Material: optically clear acrylic OCA adhesive
    • Structure: no-substrate adhesive with PET release liners
    • Thickness: 25um-250um, grade-dependent
    • Appearance: transparent, low haze, clean surface
    • Format: roll, sheet, kiss-cut or die-cut part
    • Use: glass, touch layer, and display module bonding
    Read moreDone
  • Placeholder

    High Density Polyethylene Film

    • Material: High-density polyethylene (HDPE)
    • Forms: Film rolls, sheet rolls and cut sheets
    • Density: Grade-dependent, typically 0.94-0.97 g/cm3
    • Colors: Natural, milky white, black or custom color
    • Processing: Slitting, sheet cutting and optional perforation
    • Uses: Liners, separators and temporary barriers
    Read moreDone

  • PET Films For Printed Electronics

    • Material: heat-stabilized PET polyester film
    • Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
    • Surface: corona treated, primer coated, or chemically treated
    • Color: clear, slightly hazy, or white
    • Ink fit: silver ink, carbon ink, dielectric ink
    • Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
    Read moreDone

  • Inkjet Printable Polyester Film

    • Material: Coated PET polyester film
    • Base Color: Transparent / white PET
    • Common Thickness: 75um-175um
    • Surface: Glossy, matte, or semi-matte
    • Ink Use: Dye, pigment, aqueous, selected UV inkjet
    • Format: Roll or sheet supply
    Read moreDone

  • PET Film Puncture Resistance Technical Data

    PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use.

    Read moreDone

  • UV Stabilized Polyethylene Film for Outdoor Covering and Packaging

    • Material: LDPE, LLDPE, or PE blend
    • Thickness: 40 um-250 um
    • Width: slit rolls or wide sheeting
    • Color: clear, white, black, blue, or tinted
    • Format: single wound, center-folded, or sheets
    • Use: greenhouse, outdoor cover, packaging
    Read moreDone