No products were found matching your selection.

Other Related Products

  • Transparent Conductive Ito PET Film

    • Material: PET substrate with ITO conductive layer
    • Conductive Side: Single-side ITO coating
    • Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
    • Light Transmittance: Typically >=82%
    • Film Thickness: 125 um or 175 um PET
    • Format: ITO PET roll or ITO PET sheet
    Read moreDone

  • Protective Film For Tiles

    • Material: PE/LDPE temporary surface film
    • Adhesive: Removable water-based acrylic adhesive
    • Thickness: 40-120um typical
    • Width: 100-2000mm, slit to order
    • Colors: Transparent, blue, white, black-white
    • Surfaces: Ceramic, porcelain, glazed, polished tiles
    Read moreDone

  • Protective Film for Laser Engraving: Surface Compatibility and Clean-Removal Validation

    Protective film for laser engraving can protect acrylic, anodized aluminum, stainless steel, and coated panels from handling scratches, smoke deposits, and workshop contamination, but the original film should not automatically remain during processing. The decision depends on the laser source, engraving mode, carrier material, adhesive chemistry, surface finish, equipment setting, and planned removal time. The main validation standard is not whether the engraving is visible; it is whether the film stays controlled during the run and can be removed after cooling without unacceptable adhesive transfer, haze, gloss change, coating lift, or fragments around fine details. Testing on the actual substrate is recommended before full use.

    Read moreDone

  • PET Silicone Coated Release Film

    • Base film: clear PET liner
    • Thickness: 12-100 um
    • Width: slit or jumbo roll
    • Color: transparent or light translucent
    • Coating: silicone release layer
    • Use: tapes, labels, die-cut parts
    Read moreDone

  • Removable PE Protective Film for Metal Surfaces

    • Material: PE / polyethylene film with removable pressure-sensitive adhesive
    • Thickness: commonly 30-120 um, depending on grade
    • Adhesion: low tack, medium tack, and high tack options
    • Colors: clear, blue, white, black-white, or printed film
    • Roll format: custom slit width, roll length, core size, and winding direction
    • Use: temporary surface protection during stamping, bending, shearing, handling, and transport
    Read moreDone

  • Scratch Resistant Clear PET Film

    • Material: hard-coated transparent PET film
    • Thickness: 50-188 um, selected by coating grade
    • Surface: clear gloss, low-haze hardcoat
    • Hardcoat side: first visible surface
    • Options: printable reverse, liner, adhesive-backed format
    • Supply: slit rolls, sheets, die-cut overlay blanks
    Read moreDone

  • Polyester Film For Lamination

    • Material: PET base film with EVA adhesive layer
    • Finish: Clear gloss or clear matte
    • Thickness: 25um-250um roll thickness
    • Temperature: 90C-120C typical range
    • Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
    • Use: Thermal print lamination and printed material protection
    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Electrical Grade PET Film

    • Material: Biaxially oriented PET polyester film
    • Color: Milky white, hazy white, or natural clear by grade
    • Thickness: 50 um – 350 um
    • Width: Slit roll or master roll, custom width available
    • Surface: Untreated, corona treated, or chemically treated
    • Main use: Motors, transformers, FPC, FFC, and electrical gaskets
    Read moreDone