No products were found matching your selection.
Other Related Products
-
Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.
-
- Material: Polyester film with silicone coating
- Coating: Single-side, double-side, differential release
- Color: Clear standard, tinted optional
- Roll format: Jumbo, slit, rewound roll
- Use: Adhesive converting, die cutting, laminating
- Applications: Tapes, labels, transfer adhesives
-
- Base film: flexible LDPE or application-specific HDPE
- Coating: single-side, double-side, or differential release
- Release level: easy, medium, or tight grade
- Supply format: master rolls or custom slit rolls
- Roll setup: core size and silicone side in or out confirmed
- Uses: tape, label, foam adhesive, and hygiene-material converting
-
- Material: PE protective film
- Adhesive: low tack acrylic pressure-sensitive adhesive
- Common Colors: blue, clear, translucent
- Common Thickness: 40–80 microns
- Common Roll Width: 24 mm to 1240 mm
- Typical Use: temporary protection for window glass and smooth frames
-
- Material: Coated PET polyester film
- Base Color: Transparent / white PET
- Common Thickness: 75um-175um
- Surface: Glossy, matte, or semi-matte
- Ink Use: Dye, pigment, aqueous, selected UV inkjet
- Format: Roll or sheet supply
-
PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.
-
- Base film: clear PET liner
- Thickness: 12-100 um
- Width: slit or jumbo roll
- Color: transparent or light translucent
- Coating: silicone release layer
- Use: tapes, labels, die-cut parts
-
- Material: PE film
- Adhesive: Acrylic-based adhesive
- Thickness: 30–100 microns
- Width: 100–1600 mm
- Color: Transparent, blue, black & white, custom print
- Use: Composite panel processing and temporary surface protection
-
- Material: PET, polyester, polycarbonate, polyimide, or custom technical film
- Color: clear, translucent, matte, black, or custom tinted
- Common thickness: 25-250 microns
- Supply form: roll, sheet, slit roll, or converted format
- Surface option: plain, coated, adhesive-backed, or linered
- Typical use: stencil cutting, insulation parts, overlays, and protective processing
