No products were found matching your selection.

Other Related Products

  • AC Duct Protection Film

    • Material: 3-4 mil PE/LDPE film
    • Adhesive: water-based acrylic high tack
    • Width: 24 inch, 36 inch, 48 inch
    • Color: blue or clear
    • Testing: 24-72 hour edge-lift and residue check
    • Options: perforation for repeated duct openings
    Read moreDone

  • Electrical Grade PET Film

    • Material: Biaxially oriented PET polyester film
    • Color: Milky white, hazy white, or natural clear by grade
    • Thickness: 50 um – 350 um
    • Width: Slit roll or master roll, custom width available
    • Surface: Untreated, corona treated, or chemically treated
    • Main use: Motors, transformers, FPC, FFC, and electrical gaskets
    Read moreDone

  • Laser Cut Plastic Film

    • Material: PET, polyester, polycarbonate, polyimide, or custom technical film
    • Color: clear, translucent, matte, black, or custom tinted
    • Common thickness: 25-250 microns
    • Supply form: roll, sheet, slit roll, or converted format
    • Surface option: plain, coated, adhesive-backed, or linered
    • Typical use: stencil cutting, insulation parts, overlays, and protective processing
    Read moreDone

  • Polyethylene Film Vapor Retarder: ASTM E1745 Technical Data

    This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.

    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Polyester Film For Lamination

    • Material: PET base film with EVA adhesive layer
    • Finish: Clear gloss or clear matte
    • Thickness: 25um-250um roll thickness
    • Temperature: 90C-120C typical range
    • Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
    • Use: Thermal print lamination and printed material protection
    Read moreDone

  • Mirror Safety Backing Film for Painted Glass and Mirror Backside

    • Backing: PE, PP, PET or woven reinforced film
    • Adhesive: high-tack acrylic PSA
    • Thickness: 70-250 um by grade
    • Color: clear, white, milky white or custom tint
    • Roll: slit or wide rolls, 3 inch core
    • Use: mirror backside and painted glass backing
    Read moreDone

  • Aluminum Panel Protective Film Application: Fabrication, Installation and Clean Removal

    An aluminum panel protective film application must keep the visible finish protected from lamination through fabrication, transport, installation and controlled removal. It is relevant to mill-finish, anodized, brushed, painted, powder-coated and coil-coated aluminum, including aluminum composite panels. The main risks are trapped particles, scratches, edge lift, film movement, difficult peeling, residue and coating appearance change. Selection should be based on the actual surface, coating condition, fabrication stress, expected exposure and removal stage—not thickness or tack alone—and should be confirmed through an actual-panel trial before full use.

    Read moreDone

  • PET Silicone Coated Release Film

    • Base film: clear PET liner
    • Thickness: 12-100 um
    • Width: slit or jumbo roll
    • Color: transparent or light translucent
    • Coating: silicone release layer
    • Use: tapes, labels, die-cut parts
    Read moreDone