No products were found matching your selection.

Other Related Products

  • Inkjet Printable Polyester Film

    • Material: Coated PET polyester film
    • Base Color: Transparent / white PET
    • Common Thickness: 75um-175um
    • Surface: Glossy, matte, or semi-matte
    • Ink Use: Dye, pigment, aqueous, selected UV inkjet
    • Format: Roll or sheet supply
    Read moreDone

  • Scratch Resistant Clear PET Film

    • Material: hard-coated transparent PET film
    • Thickness: 50-188 um, selected by coating grade
    • Surface: clear gloss, low-haze hardcoat
    • Hardcoat side: first visible surface
    • Options: printable reverse, liner, adhesive-backed format
    • Supply: slit rolls, sheets, die-cut overlay blanks
    Read moreDone

  • PET Films For Printed Electronics

    • Material: heat-stabilized PET polyester film
    • Thickness: 50 um, 75 um, 100 um, 125 um, 175 um
    • Surface: corona treated, primer coated, or chemically treated
    • Color: clear, slightly hazy, or white
    • Ink fit: silver ink, carbon ink, dielectric ink
    • Uses: flexible circuits, printed sensors, RFID antennas, membrane switches
    Read moreDone

  • Polyethylene Film Vapor Retarder: ASTM E1745 Technical Data

    This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.

    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • UV Blocking Window Protection Film

    • Material: Clear PE protective film
    • Adhesive: Low-to-medium tack acrylic
    • Color: Transparent clear, custom tint optional
    • Thickness: 50 um-100 um typical range
    • Roll Width: 100 mm-1600 mm customizable
    • Use: Outdoor-exposed window glass protection
    Read moreDone

  • Removable PE Protective Film for Metal Surfaces

    • Material: PE / polyethylene film with removable pressure-sensitive adhesive
    • Thickness: commonly 30-120 um, depending on grade
    • Adhesion: low tack, medium tack, and high tack options
    • Colors: clear, blue, white, black-white, or printed film
    • Roll format: custom slit width, roll length, core size, and winding direction
    • Use: temporary surface protection during stamping, bending, shearing, handling, and transport
    Read moreDone

  • Transparent Conductive Ito PET Film

    • Material: PET substrate with ITO conductive layer
    • Conductive Side: Single-side ITO coating
    • Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
    • Light Transmittance: Typically >=82%
    • Film Thickness: 125 um or 175 um PET
    • Format: ITO PET roll or ITO PET sheet
    Read moreDone

  • Protective Film For Tiles

    • Material: PE/LDPE temporary surface film
    • Adhesive: Removable water-based acrylic adhesive
    • Thickness: 40-120um typical
    • Width: 100-2000mm, slit to order
    • Colors: Transparent, blue, white, black-white
    • Surfaces: Ceramic, porcelain, glazed, polished tiles
    Read moreDone