No products were found matching your selection.
Other Related Products
-
- Material: Heat stabilized PET polyester film
- Appearance: Clear or milky white available
- Thickness Range: 50um-350um typical
- Roll Format: Custom slit roll width
- Surface: Untreated, one-side treated, or two-side treated
- Main Use: FPC, printed electronics, insulation, coating, baking, lamination
-
- Material: PE/LDPE temporary surface film
- Adhesive: Removable water-based acrylic adhesive
- Thickness: 40-120um typical
- Width: 100-2000mm, slit to order
- Colors: Transparent, blue, white, black-white
- Surfaces: Ceramic, porcelain, glazed, polished tiles
-
This ASTM E1745 technical data explains how a polyethylene film vapor retarder should be reviewed below concrete slabs. It separates standard limits from typical references, lot-specific results, and project-confirmed values for thickness, water vapor permeance, tensile strength, puncture resistance, conditioned performance, and traceability. Final acceptance should use the submitted grade, current reports, and a representative mock-up under intended project conditions.
-
- Material: 3-4 mil PE/LDPE film
- Adhesive: water-based acrylic high tack
- Width: 24 inch, 36 inch, 48 inch
- Color: blue or clear
- Testing: 24-72 hour edge-lift and residue check
- Options: perforation for repeated duct openings
-
Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.
-
- Material: PET base film with EVA adhesive layer
- Finish: Clear gloss or clear matte
- Thickness: 25um-250um roll thickness
- Temperature: 90C-120C typical range
- Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
- Use: Thermal print lamination and printed material protection
-
- Material: PE / polyethylene film with removable pressure-sensitive adhesive
- Thickness: commonly 30-120 um, depending on grade
- Adhesion: low tack, medium tack, and high tack options
- Colors: clear, blue, white, black-white, or printed film
- Roll format: custom slit width, roll length, core size, and winding direction
- Use: temporary surface protection during stamping, bending, shearing, handling, and transport
-
- Material: Biaxially oriented PET polyester film
- Color: Milky white, hazy white, or natural clear by grade
- Thickness: 50 um – 350 um
- Width: Slit roll or master roll, custom width available
- Surface: Untreated, corona treated, or chemically treated
- Main use: Motors, transformers, FPC, FFC, and electrical gaskets
-
- Materials: PE, PVC, PET and PETG
- Thickness: 30 um-600 um by grade
- Finishes: clear, matte, high gloss, wood grain, skin-feel
- Format: slit rolls, jumbo rolls or custom rolls
- Uses: MDF, cabinet, wardrobe and tabletop panels
- Checks: peel force, residue, edge lifting, color consistency
