No products were found matching your selection.
Other Related Products
-
- Material: PE / polyethylene film with removable pressure-sensitive adhesive
- Thickness: commonly 30-120 um, depending on grade
- Adhesion: low tack, medium tack, and high tack options
- Colors: clear, blue, white, black-white, or printed film
- Roll format: custom slit width, roll length, core size, and winding direction
- Use: temporary surface protection during stamping, bending, shearing, handling, and transport
-
- Material: PET base film with EVA adhesive layer
- Finish: Clear gloss or clear matte
- Thickness: 25um-250um roll thickness
- Temperature: 90C-120C typical range
- Optical Data: >=90% light transmittance, <=3.0% haze for clear gloss grade
- Use: Thermal print lamination and printed material protection
-
- Material: High-density polyethylene (HDPE)
- Forms: Film rolls, sheet rolls and cut sheets
- Density: Grade-dependent, typically 0.94-0.97 g/cm3
- Colors: Natural, milky white, black or custom color
- Processing: Slitting, sheet cutting and optional perforation
- Uses: Liners, separators and temporary barriers
-
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
-
An aluminum panel protective film application must keep the visible finish protected from lamination through fabrication, transport, installation and controlled removal. It is relevant to mill-finish, anodized, brushed, painted, powder-coated and coil-coated aluminum, including aluminum composite panels. The main risks are trapped particles, scratches, edge lift, film movement, difficult peeling, residue and coating appearance change. Selection should be based on the actual surface, coating condition, fabrication stress, expected exposure and removal stage—not thickness or tack alone—and should be confirmed through an actual-panel trial before full use.
-
- Material: PE / modified polyolefin hot melt adhesive film
- Color: Milky white, translucent, or natural by grade
- Thickness: Commonly 20 um-200 um, adjustable by structure
- Supply: Full roll, slit roll, sheet, or die-cut piece
- Liner: Release paper, release film, or liner-free option
- Use: Heat lamination, hot pressing, and industrial assembly
-
- Common supply form: jumbo roll, slit roll, sheet, or die-cut parts
- Appearance: clear transparent film for visible bonding areas
- Typical film base: PET clear film or heat-resistant specialty film construction
- Adhesive direction: clear acrylic bonding grade or process-matched adhesive system
- Typical use: transparent bonding, lamination, masking, and insulation
- Order style: factory production for industrial converting projects
-
- Material: PET, polyester, polycarbonate, polyimide, or custom technical film
- Color: clear, translucent, matte, black, or custom tinted
- Common thickness: 25-250 microns
- Supply form: roll, sheet, slit roll, or converted format
- Surface option: plain, coated, adhesive-backed, or linered
- Typical use: stencil cutting, insulation parts, overlays, and protective processing
-
- Materials: PET, PE, PP, PVC, PC.
- Formats: roll stock, sheet, slit roll, cut-to-size.
- Thickness: 0.05 mm-2.00 mm typical range.
- Slit width: 200 mm-1200 mm typical range.
- Roll core: 3 inch or 6 inch.
- Surfaces: gloss, matte, frosted, textured, treated.
