No products were found matching your selection.

Other Related Products

  • Placeholder

    High Density Polyethylene Film

    • Material: High-density polyethylene (HDPE)
    • Forms: Film rolls, sheet rolls and cut sheets
    • Density: Grade-dependent, typically 0.94-0.97 g/cm3
    • Colors: Natural, milky white, black or custom color
    • Processing: Slitting, sheet cutting and optional perforation
    • Uses: Liners, separators and temporary barriers
    Read moreDone

  • PET Film Puncture Resistance Technical Data

    PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use.

    Read moreDone
  • Placeholder

    Biaxially Oriented Polyethylene Film

    • Material: Biaxially oriented polyethylene
    • Appearance: Clear or high-gloss
    • Typical thickness: 18-40 um, grade dependent
    • Width: Master rolls and custom slit rolls
    • Surface treatment: One-side or two-side corona treatment
    • Grade options: Printing, laminating, sealable or non-sealable
    Read moreDone

  • Hot Melt Adhesive Film For Aluminum

    • Common thickness:20-300 um, ACP grades often 20-150 um
    • Available width:300-3000 mm, slit rolls for panel lamination lines
    • Resin options:EAA, EVA, PES, PO, and modified polyolefin
    • Color:Transparent, translucent, milky white, or resin-dependent
    • Structure:Glassine release paper or linerless roll format
    • Main use:Aluminum panel bonding, aluminum honeycomb, ACP, and profile lamination
    Read moreDone

  • Custom Plastic Sheet and Film Materials

    • Materials: PET, PE, PP, PVC, PC.
    • Formats: roll stock, sheet, slit roll, cut-to-size.
    • Thickness: 0.05 mm-2.00 mm typical range.
    • Slit width: 200 mm-1200 mm typical range.
    • Roll core: 3 inch or 6 inch.
    • Surfaces: gloss, matte, frosted, textured, treated.
    Read moreDone

  • Removable PE Protective Film for Metal Surfaces

    • Material: PE / polyethylene film with removable pressure-sensitive adhesive
    • Thickness: commonly 30-120 um, depending on grade
    • Adhesion: low tack, medium tack, and high tack options
    • Colors: clear, blue, white, black-white, or printed film
    • Roll format: custom slit width, roll length, core size, and winding direction
    • Use: temporary surface protection during stamping, bending, shearing, handling, and transport
    Read moreDone

  • Marble Countertop Protection Film

    • Material: PE protective film
    • Adhesive: removable water-based acrylic adhesive
    • Color options: clear, blue, white
    • Common thickness: 2.5-5 mil
    • Common widths: 24″, 30″, 36″
    • Use: temporary marble surface protection
    Read moreDone

  • Die Cut Plastic Film Parts

    • Common thickness: 0.05-0.50 mm
    • Cut style: kiss-cut or through-cut
    • Shapes: tabs, strips, frames, windows, discs
    • Color: clear, white, black, amber, custom
    • Liner: PET liner, paper liner, split liner
    • Format: roll, sheet, or single piece
    Read moreDone

  • Self Adhesive Protective Film for Control Panels

    • Material: PETor PE
    • Color: Clear or matte
    • Adhesive: Acrylic
    • Tack Level: Low to medium
    • Thickness: 50-100 microns
    • Supply Form: Rolls, sheets, die-cut pieces
    Read moreDone