No products were found matching your selection.
Other Related Products
-
- Material: LDPE/PE with flame-retardant additive system
- Thickness: 50-250 um / 4-10 mil typical range
- Width: 1 m-4 m rolls, slit width available
- Colors: orange, white, natural translucent, opaque
- Roll length: 25 m, 50 m, 100 ft, or specified length
- Options: warning print, anti-static, UV grade after test confirmation
-
Protective film for medical carpets is useful when controlled passages stay operational during personnel movement, trolley traffic, maintenance, or temporary installation work. The key is not maximum adhesion: film must remain stable at doors, turns, overlaps, and traffic hotspots while staying compatible with planned removal. Selection should balance carpet construction, surface treatment, traffic pattern, dwell time, environment, and operator method. In cleanroom or controlled areas, approve the system on the actual carpet before full-area application and retest when surface, traffic, or protection time changes.
-
- Material: optically clear acrylic OCA adhesive
- Structure: no-substrate adhesive with PET release liners
- Thickness: 25um-250um, grade-dependent
- Appearance: transparent, low haze, clean surface
- Format: roll, sheet, kiss-cut or die-cut part
- Use: glass, touch layer, and display module bonding
-
- Materials: PET, PE, PVC sheet
- Adhesive: acrylic PSA
- Color: clear, white, black, custom
- Form: sheets, cut pieces, die-cut parts
- Liner: paper or PET release liner
- Use: mounting, lamination, assembly
-
- Material: PE/LDPE temporary surface film
- Adhesive: Removable water-based acrylic adhesive
- Thickness: 40-120um typical
- Width: 100-2000mm, slit to order
- Colors: Transparent, blue, white, black-white
- Surfaces: Ceramic, porcelain, glazed, polished tiles
-
- Material: PE film
- Adhesive: acrylic pressure-sensitive adhesive
- Common colors: clear, blue, milky white
- Common thickness: 30–100 micron
- Roll format: slit rolls, log rolls, jumbo rolls
- Suitable surfaces: coated metal, stainless-look, plastic panels
-
- Material: PET substrate with ITO conductive layer
- Conductive Side: Single-side ITO coating
- Sheet Resistance: 10-15, 30-50, 80-120 ohm/sq
- Light Transmittance: Typically >=82%
- Film Thickness: 125 um or 175 um PET
- Format: ITO PET roll or ITO PET sheet
-
- Material: 3-4 mil PE/LDPE film
- Adhesive: water-based acrylic high tack
- Width: 24 inch, 36 inch, 48 inch
- Color: blue or clear
- Testing: 24-72 hour edge-lift and residue check
- Options: perforation for repeated duct openings
-
- Material: Biaxially oriented PET polyester film
- Color: Milky white, hazy white, or natural clear by grade
- Thickness: 50 um – 350 um
- Width: Slit roll or master roll, custom width available
- Surface: Untreated, corona treated, or chemically treated
- Main use: Motors, transformers, FPC, FFC, and electrical gaskets
