No products were found matching your selection.
Other Related Products
-
- Material: optical PET with AF oleophobic surface
- Surface options: clear, matte, anti-glare
- Common thickness: 75 um, 100 um, 125 um
- Color: transparent or light matte
- Format: sheet or custom die-cut size
- Application: phone, tablet, POS and terminal screens
-
- Material: PE / polyethylene film with removable pressure-sensitive adhesive
- Thickness: commonly 30-120 um, depending on grade
- Adhesion: low tack, medium tack, and high tack options
- Colors: clear, blue, white, black-white, or printed film
- Roll format: custom slit width, roll length, core size, and winding direction
- Use: temporary surface protection during stamping, bending, shearing, handling, and transport
-
- Material: LLDPE polyethylene resin
- Thickness: 20-200 um, grade-dependent
- Width: 100-2200 mm, customizable
- Color: Clear, translucent or customized
- Structure: Mono-layer or co-extruded film
- Supply format: Roll stock, tubing or lay-flat sheeting
-
An aluminum panel protective film application must keep the visible finish protected from lamination through fabrication, transport, installation and controlled removal. It is relevant to mill-finish, anodized, brushed, painted, powder-coated and coil-coated aluminum, including aluminum composite panels. The main risks are trapped particles, scratches, edge lift, film movement, difficult peeling, residue and coating appearance change. Selection should be based on the actual surface, coating condition, fabrication stress, expected exposure and removal stage—not thickness or tack alone—and should be confirmed through an actual-panel trial before full use.
-
- Material: PE protective film
- Adhesive: low tack acrylic pressure-sensitive adhesive
- Common Colors: blue, clear, translucent
- Common Thickness: 40–80 microns
- Common Roll Width: 24 mm to 1240 mm
- Typical Use: temporary protection for window glass and smooth frames
-
- Material: PE/LDPE temporary surface film
- Adhesive: Removable water-based acrylic adhesive
- Thickness: 40-120um typical
- Width: 100-2000mm, slit to order
- Colors: Transparent, blue, white, black-white
- Surfaces: Ceramic, porcelain, glazed, polished tiles
-
- Backing: PE, PP, PET or woven reinforced film
- Adhesive: high-tack acrylic PSA
- Thickness: 70-250 um by grade
- Color: clear, white, milky white or custom tint
- Roll: slit or wide rolls, 3 inch core
- Use: mirror backside and painted glass backing
-
- Material: hard-coated transparent PET film
- Thickness: 50-188 um, selected by coating grade
- Surface: clear gloss, low-haze hardcoat
- Hardcoat side: first visible surface
- Options: printable reverse, liner, adhesive-backed format
- Supply: slit rolls, sheets, die-cut overlay blanks
-
Clear protective film temperature is meaningful only when film construction, adhesive system, exposure temperature, exposure time, substrate, cooling, and post-heat checks are defined. This reference applies mainly to clear PET- or PE-based temporary protective films in heated processing or controlled storage. Use tested-grade or typical values for screening, then confirm peel, dimensional change, haze, edge condition, adhesive transfer, and removal on representative samples.
