No products were found matching your selection.
Other Related Products
-
- Material: PE film
- Adhesive: acrylic pressure-sensitive adhesive
- Common colors: clear, blue, milky white
- Common thickness: 30–100 micron
- Roll format: slit rolls, log rolls, jumbo rolls
- Suitable surfaces: coated metal, stainless-look, plastic panels
-
- Material: PE protective film
- Adhesive: low tack acrylic pressure-sensitive adhesive
- Common Colors: blue, clear, translucent
- Common Thickness: 40–80 microns
- Common Roll Width: 24 mm to 1240 mm
- Typical Use: temporary protection for window glass and smooth frames
-
PET film puncture resistance describes how a defined PET, coated PET, or adhesive-backed PET construction responds to a controlled penetrating load. The result may include peak force, probe penetration, energy to failure, and the visible break pattern. These values support comparison of films exposed to sharp edges, local pressure, handling, or converting stress, but only under matched specimen and equipment conditions. Surface compatibility and removal behavior must be confirmed with the actual sample before full use. Puncture resistance is only one failure mode; the PET film properties comparison guide explains how to review tensile strength, elongation, thickness, shrinkage, optical properties, and surface behavior alongside puncture data.
-
- Material: removable PE protective film
- Surfaces: acrylic sheet, PMMA, plexiglass, smooth plastic sheet
- Colors: clear, blue, white, black-white, printed
- Thickness: 30-100 um by grade
- Adhesion: low, medium or adjusted tack
- Format: slit rolls with confirmed core and winding direction
-
- Material: Polyester film with silicone coating
- Coating: Single-side, double-side, differential release
- Color: Clear standard, tinted optional
- Roll format: Jumbo, slit, rewound roll
- Use: Adhesive converting, die cutting, laminating
- Applications: Tapes, labels, transfer adhesives
-
- Material: hard-coated transparent PET film
- Thickness: 50-188 um, selected by coating grade
- Surface: clear gloss, low-haze hardcoat
- Hardcoat side: first visible surface
- Options: printable reverse, liner, adhesive-backed format
- Supply: slit rolls, sheets, die-cut overlay blanks
-
- Material: PE / modified polyolefin hot melt adhesive film
- Color: Milky white, translucent, or natural by grade
- Thickness: Commonly 20 um-200 um, adjustable by structure
- Supply: Full roll, slit roll, sheet, or die-cut piece
- Liner: Release paper, release film, or liner-free option
- Use: Heat lamination, hot pressing, and industrial assembly
-
An aluminum panel protective film application must keep the visible finish protected from lamination through fabrication, transport, installation and controlled removal. It is relevant to mill-finish, anodized, brushed, painted, powder-coated and coil-coated aluminum, including aluminum composite panels. The main risks are trapped particles, scratches, edge lift, film movement, difficult peeling, residue and coating appearance change. Selection should be based on the actual surface, coating condition, fabrication stress, expected exposure and removal stage—not thickness or tack alone—and should be confirmed through an actual-panel trial before full use.
-
- Backing: PE, PP, PET or woven reinforced film
- Adhesive: high-tack acrylic PSA
- Thickness: 70-250 um by grade
- Color: clear, white, milky white or custom tint
- Roll: slit or wide rolls, 3 inch core
- Use: mirror backside and painted glass backing
